Homebrew PCBs

Being able to flip a PCB over and print the other side properly requires a
perfectly 'square' PCB.  A lot of us cut pieces from larger pieces of PCB,
we'd have to stop that practice.

Robert
:)



-----Message d'origine-----
De : Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] De
la part de Stefan Trethan
Envoyé : avril 16 2006 05:55
À : Homebrew_PCBs@yahoogroups.com
Objet : Re: [Homebrew_PCBs] inkjet second side alignment (was: homebrew CNC)


...

Now if you align the PCB against the edge guide, and align the mark with  
the center mark on the table, you can print the bottom side. Then you turn  
the PCB over, and again align it against the edge guide, and the center  
mark as well, and you have it positioned in the exactly same place only  
turned over. Then you simply mirror the top layer artwork and print it out.


...

ST