Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, Mike <k4gmh@...> wrote:
>
> Another approach I've successfully used for TT is 
> to heat the PCB in an oven to ~300 F and then 
> apply the TT material.  Use an iron to further 
> raise the temp of the board to get full 
> transfer.  The idea is to get the board almost to 
> the proper temp,, apply the TT material and then 
> finish raising the PCB to the proper temp. with the iron for a good
transfer.

That sounds easy.   Except for one thing.   How
do you align the TT material on the 300 degF PCB?