Homebrew PCBs

On 30 Jan 2007 16:55:21 -0500, DJ Delorie <dj@...> wrote:
>
>
>
>
>
>
>
>  Side note: I've found that my laminator (GBC 9") won't work in my
>  office.  After an hour it's still not hot, just warm.  I plug it in in
>  the kitchen, it heats up in minutes.  Haven't taken the time to figure
>  out why yet.  So, try some other outlet on a different circuit just to
>  see if that's the problem.

Yup sounds like a plug/socket bad connection issue, try using a small
4 way extension etc to power it from that socket, I have a 60ft 3way
extension cable I use when drilling in the garden etc, the drill only
works in 2 of the sockets, but my grinder works in all 3

>
>  The outlet works fine for everything else, of course.
>                    



-- 

Lez