Homebrew PCBs

It certainly appears that this may be at least a contributing problem, 
possibly the primary one.

Chuck
WB2EDV



----- Original Message ----- 
From: "Stefan Trethan" <stefan_trethan@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Tuesday, February 12, 2008 5:15 AM
Subject: Re: [Homebrew_PCBs] Transfer looking good now


> So you had a temperature problem after all.
> Convert a fuser to run at ~180C and slow and you'll only need one pass.
>
> ST
>
>
> On Feb 12, 2008 3:00 AM, Chuck Kelsey <wb2edv@...> wrote:
>> Well, I think I may have done it.
>>
>> First, I made my boards smaller so that they wouldn't sink as much heat.
>> Instead of a 4" x 6" board with 6 circuits on it, it is now 1/3 that 
>> size.
>>
>> I ran it through 16 times.
>>
>> No traces came off.
>>
>> Chuck
>> WB2EDV
>
>
> Be sure to visit the group home and check for new Links, Files, and 
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
> Yahoo! Groups Links
>
>
>
>