Homebrew PCBs

Juabba,

Look in the Toner Transfer file folder. The file is named
Samsung_ML-2010.pdf
http://f1.grp.yahoofs.com/v1/8EXMSAh_OnsmYwmIkSIPBDmNVJ41BbIDlotL9oiNJfrnFVirnv8MTfLLR_eCwD376F0kJVzGI30EQ3GvUVb7QGcXcc9A7dxXZw/Toner_Transfer/samsung_ml-2010.pdf


Next time I'll nclude a link in the original message.

Myc

On Sat, Sep 13, 2008 at 7:28 PM, juanabba <jjose.2008@...> wrote:

>   I am afraid my last note in not clear at all
> pls let me rephrase it
>
> hi
>
> I searched the file section but could no find the instruction you
> mention, when you wrotte:
>
>
> "I've posted the instructins for refurbishng
> the Samsung cartidge in the files section"
>
> thanks a lot
>
> juabba
>
>
> --- In Homebrew_PCBs@yahoogroups.com <Homebrew_PCBs%40yahoogroups.com>,
> "juanabba" <jjose.2008@...> wrote:
> >
> > hi
> > can find the "I've posted the instructins for refurbishng the Samsung
> > cartidge in the files section" on the mentioned file section.
> > could you pls inform the name of it
> >
> > thanks in advance
> >
> > juabba
> >
> >
> > --- In Homebrew_PCBs@yahoogroups.com <Homebrew_PCBs%40yahoogroups.com>,
> "mycroft2152"
> > <mycroft2152y@> wrote:
> > >
> > > I've been using a Samsung ML=2010 laser printer along witha a Xerox
> > > laminator for pcb for a while now. The Xerox branded laminator has an
> > > adjustable temperature setting for foil that works well with the high
> > > temerature toner of the Samsung.
> > >
> > > My pcbs started to come out rather poorly after I refilled the toner
> > > cartridge. I couldn"t get a solid enough black to act as a resist.
> > > After some trial and error, I found the the refill toner was not
> > > compatible with the toner that was left in the cartidge. I emptied
> > > out all the toner and vacuumed out the cartidge, then refilled the
> > > toner ad it worked well.
> > >
> > > Recently, it started acting up again. I have been using the same
> > > cartidge for a few yers now and had refilled it a number of times. I
> > > went online and found a pdf on how to refurbish a Samsung tom=ner
> > > cartidge.
> > >
> > > What was interesting waa that the toner cartidge has a waste bin for
> > > the toner that is not deposited onto the paper. The toner is scraped
> > > to clean the roller for the next print job.
> > >
> > > I dismantled the cartidge based on the instructions and emptied the
> > > waste bin, it was jammed full.
> > >
> > > The cartidge works great now.
> > >
> > > I've posted the instructins for refurbishng the Samsung cartidge in
> > > the files section. It may be useful for other brands too.
> > >
> > > One note, there was no "fuse' in my original Samsumn cartidge. The
> > > instruction are for the Dell branded vesion that had a replaceable
> > > fuse inside the cartridge.
> > >
> > > Myc
> > >
> >
>
>  
>


[Non-text portions of this message have been removed]