Homebrew PCBs

I've been using a Samsung ML=2010 laser printer along witha a Xerox 
laminator for pcb for a while now. The Xerox branded laminator has an 
adjustable temperature setting for foil that works well with the high 
temerature toner of the Samsung.

My pcbs started to come out rather poorly after I refilled the toner 
cartridge. I couldn"t get a solid enough black to act as a resist. 
After some trial and error, I found the the refill toner was not 
compatible with the toner that was left in the cartidge. I emptied 
out all the toner and vacuumed out the cartidge, then refilled the 
toner ad it worked well.

Recently, it started acting up again. I have been using the same 
cartidge for a few yers now and had refilled it a number of times. I 
went online and found a pdf on how to refurbish a Samsung tom=ner 
cartidge.

What was interesting waa that the toner cartidge has a waste bin for 
the toner that is not deposited onto the paper. The toner is scraped 
to clean the roller for the next print job.

I dismantled the cartidge based on the instructions and emptied the 
waste bin, it was jammed full.

The cartidge works great now.

I've posted the instructins for refurbishng the Samsung cartidge in 
the files section. It may be useful for other brands too.

One note, there was no "fuse' in my original Samsumn cartidge. The 
instruction are for the Dell branded vesion that had a replaceable 
fuse inside the cartridge.

Myc

hi
can find the "I've posted the instructins for refurbishng the Samsung
cartidge in the files section"  on the mentioned file section.
could you pls inform the name of it

thanks in advance

juabba


 --- In Homebrew_PCBs@yahoogroups.com, "mycroft2152"
<mycroft2152y@...> wrote:

>
> I've been using a Samsung ML=2010 laser printer along witha a Xerox 
> laminator for pcb for a while now. The Xerox branded laminator has an 
> adjustable temperature setting for foil that works well with the high 
> temerature toner of the Samsung.
> 
> My pcbs started to come out rather poorly after I refilled the toner 
> cartridge. I couldn"t get a solid enough black to act as a resist. 
> After some trial and error, I found the the refill toner was not 
> compatible with the toner that was left in the cartidge. I emptied 
> out all the toner and vacuumed out the cartidge, then refilled the 
> toner ad it worked well.
> 
> Recently, it started acting up again. I have been using the same 
> cartidge for a few yers now and had refilled it a number of times. I 
> went online and found a pdf on how to refurbish a Samsung tom=ner 
> cartidge.
> 
> What was interesting waa that the toner cartidge has a waste bin for 
> the toner that is not deposited onto the paper. The toner is scraped 
> to clean the roller for the next print job.
> 
> I dismantled the cartidge based on the instructions and emptied the 
> waste bin, it was jammed full.
> 
> The cartidge works great now.
> 
> I've posted the instructins for refurbishng the Samsung cartidge in 
> the files section. It may be useful for other brands too.
> 
> One note, there was no "fuse' in my original Samsumn cartidge. The 
> instruction are for the Dell branded vesion that had a replaceable 
> fuse inside the cartridge.
> 
> Myc
>

I am afraid my last note in not clear at all
pls let me rephrase it


hi

I searched the file section but could no find the instruction you
mention, when you wrotte:

"I've posted the instructins for refurbishng
the Samsung cartidge in the files section" 

thanks a lot

juabba

--- In Homebrew_PCBs@yahoogroups.com, "juanabba" <jjose.2008@...> wrote:

>
> hi
> can find the "I've posted the instructins for refurbishng the Samsung
> cartidge in the files section"  on the mentioned file section.
> could you pls inform the name of it
> 
> thanks in advance
> 
> juabba
> 
> 
>  --- In Homebrew_PCBs@yahoogroups.com, "mycroft2152"
> <mycroft2152y@> wrote:
> >
> > I've been using a Samsung ML=2010 laser printer along witha a Xerox 
> > laminator for pcb for a while now. The Xerox branded laminator has an 
> > adjustable temperature setting for foil that works well with the high 
> > temerature toner of the Samsung.
> > 
> > My pcbs started to come out rather poorly after I refilled the toner 
> > cartridge. I couldn"t get a solid enough black to act as a resist. 
> > After some trial and error, I found the the refill toner was not 
> > compatible with the toner that was left in the cartidge. I emptied 
> > out all the toner and vacuumed out the cartidge, then refilled the 
> > toner ad it worked well.
> > 
> > Recently, it started acting up again. I have been using the same 
> > cartidge for a few yers now and had refilled it a number of times. I 
> > went online and found a pdf on how to refurbish a Samsung tom=ner 
> > cartidge.
> > 
> > What was interesting waa that the toner cartidge has a waste bin for 
> > the toner that is not deposited onto the paper. The toner is scraped 
> > to clean the roller for the next print job.
> > 
> > I dismantled the cartidge based on the instructions and emptied the 
> > waste bin, it was jammed full.
> > 
> > The cartidge works great now.
> > 
> > I've posted the instructins for refurbishng the Samsung cartidge in 
> > the files section. It may be useful for other brands too.
> > 
> > One note, there was no "fuse' in my original Samsumn cartidge. The 
> > instruction are for the Dell branded vesion that had a replaceable 
> > fuse inside the cartridge.
> > 
> > Myc
> >
>

Juabba,

Look in the Toner Transfer file folder. The file is named
Samsung_ML-2010.pdf
http://f1.grp.yahoofs.com/v1/8EXMSAh_OnsmYwmIkSIPBDmNVJ41BbIDlotL9oiNJfrnFVirnv8MTfLLR_eCwD376F0kJVzGI30EQ3GvUVb7QGcXcc9A7dxXZw/Toner_Transfer/samsung_ml-2010.pdf


Next time I'll nclude a link in the original message.

Myc

On Sat, Sep 13, 2008 at 7:28 PM, juanabba <jjose.2008@...> wrote:

>   I am afraid my last note in not clear at all
> pls let me rephrase it
>
> hi
>
> I searched the file section but could no find the instruction you
> mention, when you wrotte:
>
>
> "I've posted the instructins for refurbishng
> the Samsung cartidge in the files section"
>
> thanks a lot
>
> juabba
>
>
> --- In Homebrew_PCBs@yahoogroups.com <Homebrew_PCBs%40yahoogroups.com>,
> "juanabba" <jjose.2008@...> wrote:
> >
> > hi
> > can find the "I've posted the instructins for refurbishng the Samsung
> > cartidge in the files section" on the mentioned file section.
> > could you pls inform the name of it
> >
> > thanks in advance
> >
> > juabba
> >
> >
> > --- In Homebrew_PCBs@yahoogroups.com <Homebrew_PCBs%40yahoogroups.com>,
> "mycroft2152"
> > <mycroft2152y@> wrote:
> > >
> > > I've been using a Samsung ML=2010 laser printer along witha a Xerox
> > > laminator for pcb for a while now. The Xerox branded laminator has an
> > > adjustable temperature setting for foil that works well with the high
> > > temerature toner of the Samsung.
> > >
> > > My pcbs started to come out rather poorly after I refilled the toner
> > > cartridge. I couldn"t get a solid enough black to act as a resist.
> > > After some trial and error, I found the the refill toner was not
> > > compatible with the toner that was left in the cartidge. I emptied
> > > out all the toner and vacuumed out the cartidge, then refilled the
> > > toner ad it worked well.
> > >
> > > Recently, it started acting up again. I have been using the same
> > > cartidge for a few yers now and had refilled it a number of times. I
> > > went online and found a pdf on how to refurbish a Samsung tom=ner
> > > cartidge.
> > >
> > > What was interesting waa that the toner cartidge has a waste bin for
> > > the toner that is not deposited onto the paper. The toner is scraped
> > > to clean the roller for the next print job.
> > >
> > > I dismantled the cartidge based on the instructions and emptied the
> > > waste bin, it was jammed full.
> > >
> > > The cartidge works great now.
> > >
> > > I've posted the instructins for refurbishng the Samsung cartidge in
> > > the files section. It may be useful for other brands too.
> > >
> > > One note, there was no "fuse' in my original Samsumn cartidge. The
> > > instruction are for the Dell branded vesion that had a replaceable
> > > fuse inside the cartridge.
> > >
> > > Myc
> > >
> >
>
>  
>


[Non-text portions of this message have been removed]

HI  Myc

thanks a lot
very good pdf

best regards
juabba

--- In Homebrew_PCBs@yahoogroups.com, "Myc Holmes" <mycroft2152y@...>
wrote:
>
> Juabba,
> 
> Look in the Toner Transfer file folder. The file is named
> Samsung_ML-2010.pdf
>
http://f1.grp.yahoofs.com/v1/8EXMSAh_OnsmYwmIkSIPBDmNVJ41BbIDlotL9oiNJfrnFVirnv8MTfLLR_eCwD376F0kJVzGI30EQ3GvUVb7QGcXcc9A7dxXZw/Toner_Transfer/samsung_ml-2010.pdf
> 
> 
> Next time I'll nclude a link in the original message.
> 
> Myc
> 
> On Sat, Sep 13, 2008 at 7:28 PM, juanabba <jjose.2008@...> wrote:
> 
> >   I am afraid my last note in not clear at all
> > pls let me rephrase it
> >
> > hi
> >
> > I searched the file section but could no find the instruction you
> > mention, when you wrotte:
> >
> >
> > "I've posted the instructins for refurbishng
> > the Samsung cartidge in the files section"
> >
> > thanks a lot
> >
> > juabba
> >
> >
> > --- In Homebrew_PCBs@yahoogroups.com
<Homebrew_PCBs%40yahoogroups.com>,
> > "juanabba" <jjose.2008@> wrote:
> > >
> > > hi
> > > can find the "I've posted the instructins for refurbishng the
Samsung
> > > cartidge in the files section" on the mentioned file section.
> > > could you pls inform the name of it
> > >
> > > thanks in advance
> > >
> > > juabba
> > >
> > >
> > > --- In Homebrew_PCBs@yahoogroups.com
<Homebrew_PCBs%40yahoogroups.com>,
> > "mycroft2152"
> > > <mycroft2152y@> wrote:
> > > >
> > > > I've been using a Samsung ML=2010 laser printer along witha a
Xerox
> > > > laminator for pcb for a while now. The Xerox branded laminator
has an
> > > > adjustable temperature setting for foil that works well with
the high
> > > > temerature toner of the Samsung.
> > > >
> > > > My pcbs started to come out rather poorly after I refilled the
toner
> > > > cartridge. I couldn"t get a solid enough black to act as a resist.
> > > > After some trial and error, I found the the refill toner was not
> > > > compatible with the toner that was left in the cartidge. I emptied
> > > > out all the toner and vacuumed out the cartidge, then refilled the
> > > > toner ad it worked well.
> > > >
> > > > Recently, it started acting up again. I have been using the same
> > > > cartidge for a few yers now and had refilled it a number of
times. I
> > > > went online and found a pdf on how to refurbish a Samsung tom=ner
> > > > cartidge.
> > > >
> > > > What was interesting waa that the toner cartidge has a waste
bin for
> > > > the toner that is not deposited onto the paper. The toner is
scraped
> > > > to clean the roller for the next print job.
> > > >
> > > > I dismantled the cartidge based on the instructions and
emptied the
> > > > waste bin, it was jammed full.
> > > >
> > > > The cartidge works great now.
> > > >
> > > > I've posted the instructins for refurbishng the Samsung
cartidge in

> > > > the files section. It may be useful for other brands too.
> > > >
> > > > One note, there was no "fuse' in my original Samsumn cartidge. The
> > > > instruction are for the Dell branded vesion that had a replaceable
> > > > fuse inside the cartridge.
> > > >
> > > > Myc
> > > >
> > >
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>