Homebrew PCBs

Machining those side-supports out of fiberglass epoxy isn't looking so bad now, is it?

;')

Steve Greenfield AE7HD

--- In Homebrew_PCBs@yahoogroups.com, "sailingto" <sailingtoo@...> wrote:
>
> The laminator is now in stock.....  at $229!!!
> 
> 
> 
> --- In Homebrew_PCBs@yahoogroups.com, "sailingto" <sailingtoo@> wrote:
> >
> > 
> > Thanks for info - I read those specs but missed the temperature line.... open my eyes!
> > 
> > It's listed as unavailable now, and doesn't seem to have any idea when it will be available again.  Darn it - I was about to order one today.
> > 
> > Even if it only gets to 325ºF would do a toner transfer with HP P1006 toner.  I nomrally do my transfers with a roller temp around 310-320ºF.
> > 
> > Thanks again for info.
> > 
> > Ken H>
> > 
> > 
> > --- In Homebrew_PCBs@yahoogroups.com, "Richard" <rdheiliger@> wrote:
> > >
> > > 
> > > 
> > > The specs from the amazon page:
> > > Power: 600W
> > > LEDS: Red LED when preheating. Green LED when ready.
> > > Voltage: 110-120V AC, 2.4A @ 60Hz
> > > Speed: 2.5pp/min
> > > Working Temperature Range: 77F (25C) - 390.2F (200?C) (adjustable)
> >
>