Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

RE: [Homebrew_PCBs] Re: Cupric Chloride Fumes

2012-12-03 by Tony Smith

> >>> The HCl solution I used is only 3% and the fumes were not too bad. I
> >>> do not want things in the basement to rust or get that "brown" film
> >>> from
> > the
> >> fumes.
> >>> Just as important is the effect it can have on the human body.
> >>
> >> HCl is naturally occuring in the 'body'.
> >
> >
> > ...so it's perfectly ok to breathe, drink&  bathe in then?  Neat!
> 
> Ok if it's not real concentrated.
> 
> > Just the thing to clean out that stubborn bit of grease under your
> > fingernails, or add a bit more kick to your evening cocktail.
> 
> The stuff in the hardware shop is "reasonably" concentrated, but i used to
de-
> rust steel with it diluted 3:1. Gloves weren't needed, but a cut would
sting a bit
> (like lemon juice or vinegar).
> 
> The green enviro wussies would use surgical gloves just to pick their
nose;)


So not-very-concentrated diluted-down-lots HCL is perfectly ok.  Got it. 

I'll pour some on my cornflakes now.

Tony

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.