Welcome aboard! Can you post some photos of your work?
On Tue, May 13, 2014 at 3:55 AM, drsvenoleson@... [Homebrew_PCBs] <Homebrew_PCBs@yahoogroups.com> wrote:
> I've been doing through hole etching for about 2.5 years now. I work mostly with brass, although I have done some aluminum. I have done a few circuit boards of my own design, but that is not where I spend most of my time. Because I do very detailed designs on very thin brass (.005 inch), the toner transfer method has never been an option. I use a dry film resist with a top and bottom stencil to get my designs made. Recently I have been wanting to create smaller and smaller etched items and have run into needing a better printer than the ones I've been using. The ones I9;ve been using are 99% from Kinko's which is no longer an option (I9;ll explain in a longer post), and a HP4100.
On Tue, May 13, 2014 at 3:55 AM, drsvenoleson@... [Homebrew_PCBs] <Homebrew_PCBs@yahoogroups.com> wrote:
> I've been doing through hole etching for about 2.5 years now. I work mostly with brass, although I have done some aluminum. I have done a few circuit boards of my own design, but that is not where I spend most of my time. Because I do very detailed designs on very thin brass (.005 inch), the toner transfer method has never been an option. I use a dry film resist with a top and bottom stencil to get my designs made. Recently I have been wanting to create smaller and smaller etched items and have run into needing a better printer than the ones I've been using. The ones I9;ve been using are 99% from Kinko's which is no longer an option (I9;ll explain in a longer post), and a HP4100.