Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

Re: [SPAM]Re: [SPAM]RE: [Homebrew_PCBs] Direct Laser Printing Video

2014-08-04 by Mark Lerman

Hard to tell because I have opened these so many times, but I would guess somewhere in the 10-12 hour range. The actual time to do it is much less, but keeping yourself oriented, keeping track of screws, etc will require attention.

There is another version of the hack that is physically simpler, but it requires the use of a microcontroller. It's actually the method I prefer, but I wanted to make the process accessible to people without microcontroller familiarity.

Mark

Mark

At 10:55 AM 8/4/2014, you wrote:


I haven't had time to view the video yet, but can you estimate how much time it would take for an average person (one who has never been inside a laser printer other than to change a toner cartridge) to modify one of the subject printers?

Thanks,
Dave M

---In Homebrew_PCBs@yahoogroups.com, wrote :


Here's the Instructable < http://www.instructables.com/id/Modification-of-the-Lexmark-E260-for-Direct-Laser-/
>

Mark



Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.