Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

portable power supply NIM module

2016-01-09 by john_chortomaris@...

Mech-Tronics 512 cart need power which refer on the front panel. this is +24v /0.01A (10mA) , -24v/0.02A (20mA) , +12v/0.1A (100mA) -12v/0.05A (50mA) . I had translate correct requirement of power from the panel?

Also, if I made the follow circuit

τροφοδοτικο +24v, -24v, +12v και -12v



τροφοδοτικο +24v, -24v, +12v και -12v
Γεια σας, Υπαρχει καποιος πολυ ευκολος τροπος να παραξουμε +- 24v +-12v? εχω παραξειπριν λιγο καιρο με τον MC34063 -9V. στα τροφοδοτικα pc παραγεται τα...

View on www.hlektronika.gr
Preview by Yahoo



and on the position which is the bridge and capacitors change and put the battery 36v (3*12v in series) / 1.2Ah with fuse on every voltage is good choice? I have not some very special power supply. everything which is simple...but portable power supply with DC input.

second, must I power the preamplifier on serial port back of nim module?


Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.