Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

Re: Hot PCB toner Transfer

2016-07-10 by duwaynes@...

When I do a board with Hot Toner Transfer I have always had better luck running the board through the Scotch laminator I use 3 times to preheat before I applied the paper. Then 4 more times , once in each direction to transfer the toner.
There is information about using packing tape applied to printer paper as a transfer medium at
TheRandomLab: DIY PCBs on the cheap: toner transfer with Box Packing Tape and a Hair Straightener / Iron
TheRandomLab: DIY PCBs on the cheap: toner transfer...
A few months ago I started to design an affordable 2WD Robot Kit to teach 20 students in a workshop in the AVM Master, at the Universidad Politécnica ...
View on therandomlab.blogs...
Preview by Yahoo
I have not tried it, but have some small boards coming up so might give it a try.

DuWayne

kv4qb.blogspot.com

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.