Homebrew PCBs

Stefan,

This is the cutter that feeds the board between two rollers and cuts 
it while feeding the board. Very unusual but works like a dream.  Mike

--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan 
<stefan_trethan@g...> wrote:
> On Sun, 28 Dec 2003 06:02:45 -0000, mikezcnc <marabu@c...> wrote:
> 
> > The said shears cut wonderfully a regular fiberglass board. 
however, I 
> > just learned that a Radio Shack-type Prottype Board gets crack 
terribly.
> 
> 
> Do you have a shear which slides down a blade simultaneously the 
whole 
> length?
> or do you have shear which pivots the blade down?
> Or have i not read wrong and you mentioned a roller?
> 
> ST