Homebrew PCBs

----- Original Message ----- 
From: "mikezcnc" <marabu@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Monday, December 29, 2003 11:20 AM
Subject: [Homebrew_PCBs] Re: How to cut circuit boards? small correction


> Stefan,
>
> This is the cutter that feeds the board between two rollers and cuts
> it while feeding the board. Very unusual but works like a dream.  Mike
>
> --- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan
> <stefan_trethan@g...> wrote:
> > On Sun, 28 Dec 2003 06:02:45 -0000, mikezcnc <marabu@c...> wrote:
> >
> > > The said shears cut wonderfully a regular fiberglass board.
> however, I
> > > just learned that a Radio Shack-type Prottype Board gets crack
> terribly.

IIRC SRBP board shears properly if it is heated first. This softens the
resin.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@...
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html