Homebrew PCBs

Ok, thanks Steve, I remembered there was some problems with the images
but didn't know what it was exactly. I have created a folder named "TT 8mil"
in the files section, the full sized pictures are in there. Hope it works
now ;-),

    Pedro
  -----Mensaje original-----
  De: Steve [mailto:alienrelics@...]
  Enviado el: lunes, 29 de diciembre de 2003 5:17
  Para: Homebrew_PCBs@yahoogroups.com
  Asunto: [Homebrew_PCBs] Re: Toner transfer


  They're beautiful, but- no one but you and I, the moderator, can see
  the huge files you uploaded. The Photos section resizes everything
  down to 300x400, that is all anyone else can see.

  If I could get rid of the Photos section of the list, I would, but
  there doesn't seem to be any provision for it.

  This is why I prefer and recommend the Files section.

  Steve

  --- In Homebrew_PCBs@yahoogroups.com, "Pedro Perez de Ayala Rull"
  <payala@y...> wrote:
  >
  >     Hi all, once again I'm a little bit late... I posted a message
  some time
  > ago, talking about my experience with toner transfer. I'll briefly
  say that
  > I have been doing 8mil wide traces with 8mil clearance boards with
  very few
  > problems using an HP 1010 laser printer, a DSC laminator and Time
  magazine
  > paper. Some people asked if I could upload some pictures; I have
  added them
  > to the photos section, in the directory called "TT 8mil" there is one
  > picture of a test that I did wich I cannot tell exact traces width, but
  > those two traces going between 0.1 mil spaced pads is pretty much
  > self-explainatory. The other two pictures are form a part of a 5 by
  6 inch
  > board that I am working on, I only showed a part of the board to
  show it in
  > detail but the whole board had no errors, the only errors I have
  right now
  > is aligning both sides of the board and drilling accurately, as you
  can see
  > in the etched picture.
  >
  >     Hope this helps someone, since I had to make many trials to achieve
  > these results and would like this info to be useful.
  >
  >     Thank you all for this wonderful group!!,
  >     Pedro
  ]



  Be sure to visit the group home and check for new Bookmarks and files:
  http://groups.yahoo.com/group/Homebrew_PCBs


        Yahoo! Groups Sponsor
              ADVERTISEMENT





----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/Homebrew_PCBs/

    b.. To unsubscribe from this group, send an email to:
    Homebrew_PCBs-unsubscribe@yahoogroups.com

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]