Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

HP Laserjet Fuser

2004-11-11 by mikezcnc

I  have a laserjet fuser and an curious if voltages used for the 
heating element are fairly similar. I traced from the circuit and it 
appears that it is a 120V AC. Is this what you have in your fusers? 

And if so then for the test purposes have you tried to apply that 
voltage to the fuser?  Mike

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.