Synth-DIY Yahoo! Groups Archives

Good. Then only one other thing remains - to change the bank. Banks are limited to 127 patches (because when midi came out, who would ever need more than that?). On the channel strip/parameter thing at the left on the arrange window there is a place for bank/patch. there is a popup menu for each one, although they are really near to each other. You can also change the bank on the keyboard or module using whatever buttons it has.

Checked and done all that but it is still only showing the 127 GM sounds.
Rob

--- In Logic_Cafe@yahoogroups.com, GAmoore@a... wrote:
> Ok, it sounds like you are not able to access your keyboard from Logic and
> you need to set up Logic? In that case you get the video, or read the manual, or
> try to follow these instructions.
>
> 1. Go to Environment Window
> 2. Create a new Multi-Instrument
> 3. Click on or more of the little grids to activate those midi channels
> 4. While selecting the multi-instrument, look in the side bar at left, and
> choose the correct midi channel. For example, if your keyboard is plugged into
> port 1 on an AMT8 midi interface, then choose port 1.
> 5. This assumes you already ran the audiomidi utility in the folder
> applications > utilities. So that the OS sees the Midi interface.
> 6. Make sure to connect midi cables to the interface. Out from the interface
> to the In of the keyboard, and vice-versa, and also connect the midi interface
>; to the computer (e.g. the AMT8 needs a USB cable, but some audio boards have
> a midi interface too so no need to connect them).
>

Apple Logic Pro /LogicExpress Discussion

Re: [Logic_Cafe] Re: voices

Attachments

Move to quarantaine