THIS was what I was looking for. This very good engineer that I have worked with for years does something like this and it's the best I've seen. But he has tons of endorsements and tons of gear. I'll check it out. In the interim, Soundtrack is working pretty well. t On Aug 11, 2008, at 11:04 PM, GAmoore@... wrote: > thats easy enough to do. Take a bit of pure noise without any music/ > speech. > Create a new file from the same region. In the sample editor, > reverse the > phase. Then loop it infinitely against the audio. In theory it > should cancel out > the noise, but I doubt it will work extremely well - because the > noise is > fluctuating somewhat randomly. If the materials is speech, you can > take an eq and > cut out any frequencies below the lowest speech note, and maybe put > a dip in the > higher end hiss area too. All that for free without buying > anything ..,. or > use Soundtrack as someone suggested. If those don't work, see if > there are > trials of Bias Soundsoap, or Izotope RX, etc. I think Waves has > something too - > but Waves is always really expensive, hard to install, then has > insanely high > subscription fees for updates. > > > > > I have a friend who is an audio engineer who explained to me a > showed > > me that to clean up some recordings, he samples the noise at the > > beginning of the track or sample ---usually AC noise---and then uses > > some kind of phase reversal to cancel that noise out. In other > words, > > after this procedure, the noise is gone and the track is much > > cleaner. It is even used on old 78 or 33 1/3rd LPs when transferring > > them to CD. I do a lot of transfers from cassette to CD and they are > > so dirty, it's horrible. > > > > Do we have or can we use anything like that in any one of Logic's > > samplers or plug-ins? > > > > > > > > ************** > Looking for a car that's sporty, fun and fits in your budget? > Read reviews on AOL Autos. > > (http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000017 > ) > > [Non-text portions of this message have been removed] > > > Tim McLane timmclane@... [Non-text portions of this message have been removed]
Message
Re: [Logic_Cafe] sample out noise
2008-08-12 by Tim McLane
Attachments
- No local attachments were found for this message.