Well, the wires WERE there "just waiting to be hooked up! The left- most switch has a blue/white wire that runs down the left side of the car and operates only with the main beam on. Must be for driving light(s). The switch second from the left has a red/yellow wire that runs down the left side of the car and operates the fog lamp(s). Only the main light switch has to be on for operation. Simple job after finding the wires! Both wires are in the harness and just taped off. I used two different schematics I have. One doesn't even have fog/driving lights on it but the other has a "spot" light. The one with the spot light is from the build manual for the 1985 Mantula V8, 3 litre, 2 litre, and the 1600. It is hard to read so I don't think it would post very good. I'll make copies if anyone wants one. Don Lattimer #3m5759 Willits, CA Would > be nice if the wires were there just waiting to be connected to the > lights. > > Don Lattimer, > #3m5759 > Willits, CA >
Message
Re: Fog lights/ switches
2002-05-31 by mcaqmd
Attachments
- No local attachments were found for this message.