Hi Hampton,
you have to find 32 or 33 screws connecting the body with the chassis. You did not mention the screws under the rear windscreen (inside the car) and not under the front windscreen (behind the dashboard), there are as well 4 screws on each side under the doors.
There is not much room between chassis & body. You have to lift the boot slowly cm by cm and have a look in front to the footwells, if you are once higher than the rear axle you can take the body of with a second person. Don´t pull the body from the rear side because you can brake the body easily near the rear windscreen. Better put something under seat moulds.
Later be careful working on the chassis. If all angles are 90 degree the body will not fit. You have to take the measures as they are.
Good luck
Christian
MarcosManiacs@yahoogroups.com schrieb am 15.08.05 02:41:24:
I'm about to pull the body off the chassis of #5463 and I need to know
if there are any "hidden" connections I need to know about. I've
removed the (very rusted) screws and bolts from the rockers, along the
tops and bottom of the seat area, the parking brake and the footwells.
Anywhere else I need to look before I start to lift and pull?
Thanks,
Hampton