2018-08-17 by hide809rig169@...
Body is now off chassis. Problem was rust, foam pads, under coat. Major problem, at some time, seat pans were repaired, or attempted to be repaired. Fiberglass resin attached seat pans to lower chassis rails. Used a reciprocating body saw to separate chassis from seat pans. Even with that done, first several inches of body movement was tight and tedious. I did as Larry Meadows directed, installed a piece of tubing inside body, between parcel shelf and seat backs. Had two eye bolts that straps were attached to. Used my two post lift, body came right off once clear. Lift was able to get body tall enough to fit on roll around cart I made. No damage done so far to body that I can see at present. Chassis tubes are rusty as typical. Now for next chapter, chassis repair. Glad this is over.
Steve V. Arizona USA
