Marcos Maniacs

Hi Everyone,
     Finally my container has arrived and I am pleased to say that Rory and 
I have reached agreement that MarcosParts USA will be the exclusive stocking 
disributor for Marcos parts in the US and Canada.

In setting up the operation I have tried to stock both the most in demand 
items plus the difficult to ship ones such as Windscreens. Obviously we 
cannot hold every part as the population of Marcos cars in North America is 
quite small, but as we ship containers three or four times a year from the 
UK we can always handle one off requirements.

By way of background, Marcos Parts USA is part of Chevron Tiga cars which is 
based in Jupiter Florida. We design, build and restore Race cars and supply 
parts and service for Chevron, Tiga, Lola and now Marcos cars. While the 
emphasis is on vintage and historic racing we also restore Lotus and other 
British makes.

I am currently restoring a 1969 Marcos 3 ltr. ford for vintage racing and my 
partner was a very successful Marcos racer in the 1970's.

This means that we can offer advice and support for performance upgrades and 
will offer some of these in addition to the standard Marcos spares.  We will 
also offer parts not easily sourced in the US and Canada which are not 
standard Marcos parts.

I will make a proper  parts and price list available in the near future but 
the following is the currently available stock.

I cannot finalize the prices until I have the final numbers on shipping and 
duty etc.,  but I am issuing this list as our transporter is making a trip 
to the West Coast and back leaving 16th Dec. This means that there is a 
chance for delivery at much reduced rates to normal, in time for the 
holidays.

Here are the available parts;

  50mm wheel Badge
  Door Hinge Bush
  Door Push Button
  Door Seal
  Boot( Trunk) Seal
  Bonnet Rubber
  Headlamp Cover
  Headlamp Cover Clip
  U section ( for above)
  Pedal Box
  Pedal Box Cover
  Pedal Box UJ
  Clutch Master Cyl.
  Wheel Cylinder
  Boot Badge
  Hand Brake Cable (Wood Chassis only)
  Brake light Switch
  Chassis Bung
  Chassis Sponge
  Engine Mounting V6, V8, 1600
  Gearbox Mounting V6, 1600
  Water Pump V6, Volvo
  Heater Ducting
  Headlamp Inner/Outer round only
  Headlamp bowl
  Horn pencil
  Rear lamps 1800
  Exhaust Manifold gasket
  Fuel Filler Cap
  Grommet
  Throttle Cable
  Speedo Cable
  Checkstrap and Hooks
  Steering Rose Joint
  Steering Rods
  Steering UJ's
  Radius Rod Bush( standard and uprated)
  Top Ball joint
  Panhard Rose Joint
  Prop shaft UJ
  Bump Stop
  Quarter Glass
  Windscreen
  Rear Screen Perspex
  Screen Gasket Front/ Rear
  Chrome Filler Strip
  Headlamp Cover Rubber
  Rain Gutter


We also have an updated complete front Brake Caliper Kit which comes with 
all lines and fittings and gives approximately 50% more Pad area with 4 Pot 
Calipers. Best of all it is a bolt on with NO modifications to the supension 
or uprights.

also a complete range of uprated supension bushes to improve the handling, 
from fast  road to race.

Finally as we find improvements from our racing program which can be 
translated to road use we will pass on that information for customers.

Last but not least these are the cities we will visit on our road trip.
Atlanta, Indianapolis, Kansas City, Denver, Colorado Springs, Las Vegas, Los 
Angeles, San Francisco, Portland, Seattle.
So if you are on route we can deliver at a very modest cost.

_________________________________________________________________
Cell phone \ufffdswitch\ufffd rules are taking effect \ufffd find out more here. 
http://special.msn.com/msnbc/consumeradvocate.armx

Good morning,
Larry Meadows, here.
What is the status of my pallet of parts? I will be able to come over and pick them up between Dec.16th and 20th, or any time after Jan.7th.
You had said you might be able to deliver them here at Wimauma. If so those dates would also be good. 
Regards,
Larry
#5536


---------------------------------
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing

Gary,

Please let me know what the cost will be for the
following parts to be shipped to Northern Virginia. 

  Door Seal 2ea
  Boot( Trunk) Seal
  Bonnet Rubber
  Headlamp Cover 2ea, not the ones with rubber
mounting
  Hand Brake Cable (Wood Chassis only)
  Steering Rose Joint 2ea
  Rain Gutter both sides

Thanks for the efforts you are putting into USA
Marcos.
Bob Magnotti


--- Garry Diver <garrydiver@...> wrote:
> Hi Everyone,
>      Finally my container has arrived and I am
> pleased to say that Rory and 
> I have reached agreement that MarcosParts USA will
> be the exclusive stocking 
> disributor for Marcos parts in the US and Canada.
> 
> In setting up the operation I have tried to stock
> both the most in demand 
> items plus the difficult to ship ones such as
> Windscreens. Obviously we 
> cannot hold every part as the population of Marcos
> cars in North America is 
> quite small, but as we ship containers three or four
> times a year from the 
> UK we can always handle one off requirements.
> 
> By way of background, Marcos Parts USA is part of
> Chevron Tiga cars which is 
> based in Jupiter Florida. We design, build and
> restore Race cars and supply 
> parts and service for Chevron, Tiga, Lola and now
> Marcos cars. While the 
> emphasis is on vintage and historic racing we also
> restore Lotus and other 
> British makes.
> 
> I am currently restoring a 1969 Marcos 3 ltr. ford
> for vintage racing and my 
> partner was a very successful Marcos racer in the
> 1970's.
> 
> This means that we can offer advice and support for
> performance upgrades and 
> will offer some of these in addition to the standard
> Marcos spares.  We will 
> also offer parts not easily sourced in the US and
> Canada which are not 
> standard Marcos parts.
> 
> I will make a proper  parts and price list available
> in the near future but 
> the following is the currently available stock.
> 
> I cannot finalize the prices until I have the final
> numbers on shipping and 
> duty etc.,  but I am issuing this list as our
> transporter is making a trip 
> to the West Coast and back leaving 16th Dec. This
> means that there is a 
> chance for delivery at much reduced rates to normal,
> in time for the 
> holidays.
> 
> Here are the available parts;
> 
>   50mm wheel Badge
>   Door Hinge Bush
>   Door Push Button
>   Door Seal
>   Boot( Trunk) Seal
>   Bonnet Rubber
>   Headlamp Cover
>   Headlamp Cover Clip
>   U section ( for above)
>   Pedal Box
>   Pedal Box Cover
>   Pedal Box UJ
>   Clutch Master Cyl.
>   Wheel Cylinder
>   Boot Badge
>   Hand Brake Cable (Wood Chassis only)
>   Brake light Switch
>   Chassis Bung
>   Chassis Sponge
>   Engine Mounting V6, V8, 1600
>   Gearbox Mounting V6, 1600
>   Water Pump V6, Volvo
>   Heater Ducting
>   Headlamp Inner/Outer round only
>   Headlamp bowl
>   Horn pencil
>   Rear lamps 1800
>   Exhaust Manifold gasket
>   Fuel Filler Cap
>   Grommet
>   Throttle Cable
>   Speedo Cable
>   Checkstrap and Hooks
>   Steering Rose Joint
>   Steering Rods
>   Steering UJ's
>   Radius Rod Bush( standard and uprated)
>   Top Ball joint
>   Panhard Rose Joint
>   Prop shaft UJ
>   Bump Stop
>   Quarter Glass
>   Windscreen
>   Rear Screen Perspex
>   Screen Gasket Front/ Rear
>   Chrome Filler Strip
>   Headlamp Cover Rubber
>   Rain Gutter
> 
> 
> We also have an updated complete front Brake Caliper
> Kit which comes with 
> all lines and fittings and gives approximately 50%
> more Pad area with 4 Pot 
> Calipers. Best of all it is a bolt on with NO
> modifications to the supension 
> or uprights.
> 
> also a complete range of uprated supension bushes to
> improve the handling, 
> from fast  road to race.
> 
> Finally as we find improvements from our racing
> program which can be 
> translated to road use we will pass on that
> information for customers.
> 
> Last but not least these are the cities we will
> visit on our road trip.
> Atlanta, Indianapolis, Kansas City, Denver, Colorado
> Springs, Las Vegas, Los 
> Angeles, San Francisco, Portland, Seattle.
> So if you are on route we can deliver at a very
> modest cost.
> 
>
_________________________________________________________________
> Cell phone \ufffdswitch\ufffd rules are taking effect \ufffd find
> out more here. 
> http://special.msn.com/msnbc/consumeradvocate.armx
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> 
> To unsubscribe from this group, send an email to:
> MarcosManiacs-unsubscribe@yahoogroups.com
> 
>  
> 
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/ 
> 
> 


__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree

Hi Larry,
  Well your parts are here and cleared customs Thursday, only to be selected 
for a TSA X Ray. So the container is in line and I am waiting to 
hear.Hopefully it will get cleared Tues. I will let you know as soon as I 
hear.

Garry


>From: larry meadows <lmeadowsw@...>
>Reply-To: MarcosManiacs@yahoogroups.com
>To: MarcosManiacs@yahoogroups.com
>Subject: Re: [MarcosManiacs] Marcos Parts USA in business.
>Date: Fri, 12 Dec 2003 06:03:58 -0800 (PST)
>
>Good morning,
>Larry Meadows, here.
>What is the status of my pallet of parts? I will be able to come over and 
>pick them up between Dec.16th and 20th, or any time after Jan.7th.
>You had said you might be able to deliver them here at Wimauma. If so those 
>dates would also be good.
>Regards,
>Larry
>#5536
>
>
>---------------------------------
>Do you Yahoo!?
>New Yahoo! Photos - easier uploading and sharing

_________________________________________________________________
Wonder if the latest virus has gotten to your computer? Find out. Run the 
FREE McAfee online computer scan! 
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

Hi Bob,

This is to confirm your order as listed. I will E mail you the prices as 
soon as I have the final shipping costs.

Garry
MarcosParts USA


>From: Bob Magnotti <rhdspritemk1@...>
>Reply-To: MarcosManiacs@yahoogroups.com
>To: MarcosManiacs@yahoogroups.com
>Subject: Re: [MarcosManiacs] Marcos Parts USA in business.
>Date: Fri, 12 Dec 2003 18:29:25 -0800 (PST)
>
>Gary,
>
>Please let me know what the cost will be for the
>following parts to be shipped to Northern Virginia.
>
>   Door Seal 2ea
>   Boot( Trunk) Seal
>   Bonnet Rubber
>   Headlamp Cover 2ea, not the ones with rubber
>mounting
>   Hand Brake Cable (Wood Chassis only)
>   Steering Rose Joint 2ea
>   Rain Gutter both sides
>
>Thanks for the efforts you are putting into USA
>Marcos.
>Bob Magnotti
>
>
>--- Garry Diver <garrydiver@...> wrote:
> > Hi Everyone,
> >      Finally my container has arrived and I am
> > pleased to say that Rory and
> > I have reached agreement that MarcosParts USA will
> > be the exclusive stocking
> > disributor for Marcos parts in the US and Canada.
> >
> > In setting up the operation I have tried to stock
> > both the most in demand
> > items plus the difficult to ship ones such as
> > Windscreens. Obviously we
> > cannot hold every part as the population of Marcos
> > cars in North America is
> > quite small, but as we ship containers three or four
> > times a year from the
> > UK we can always handle one off requirements.
> >
> > By way of background, Marcos Parts USA is part of
> > Chevron Tiga cars which is
> > based in Jupiter Florida. We design, build and
> > restore Race cars and supply
> > parts and service for Chevron, Tiga, Lola and now
> > Marcos cars. While the
> > emphasis is on vintage and historic racing we also
> > restore Lotus and other
> > British makes.
> >
> > I am currently restoring a 1969 Marcos 3 ltr. ford
> > for vintage racing and my
> > partner was a very successful Marcos racer in the
> > 1970's.
> >
> > This means that we can offer advice and support for
> > performance upgrades and
> > will offer some of these in addition to the standard
> > Marcos spares.  We will
> > also offer parts not easily sourced in the US and
> > Canada which are not
> > standard Marcos parts.
> >
> > I will make a proper  parts and price list available
> > in the near future but
> > the following is the currently available stock.
> >
> > I cannot finalize the prices until I have the final
> > numbers on shipping and
> > duty etc.,  but I am issuing this list as our
> > transporter is making a trip
> > to the West Coast and back leaving 16th Dec. This
> > means that there is a
> > chance for delivery at much reduced rates to normal,
> > in time for the
> > holidays.
> >
> > Here are the available parts;
> >
> >   50mm wheel Badge
> >   Door Hinge Bush
> >   Door Push Button
> >   Door Seal
> >   Boot( Trunk) Seal
> >   Bonnet Rubber
> >   Headlamp Cover
> >   Headlamp Cover Clip
> >   U section ( for above)
> >   Pedal Box
> >   Pedal Box Cover
> >   Pedal Box UJ
> >   Clutch Master Cyl.
> >   Wheel Cylinder
> >   Boot Badge
> >   Hand Brake Cable (Wood Chassis only)
> >   Brake light Switch
> >   Chassis Bung
> >   Chassis Sponge
> >   Engine Mounting V6, V8, 1600
> >   Gearbox Mounting V6, 1600
> >   Water Pump V6, Volvo
> >   Heater Ducting
> >   Headlamp Inner/Outer round only
> >   Headlamp bowl
> >   Horn pencil
> >   Rear lamps 1800
> >   Exhaust Manifold gasket
> >   Fuel Filler Cap
> >   Grommet
> >   Throttle Cable
> >   Speedo Cable
> >   Checkstrap and Hooks
> >   Steering Rose Joint
> >   Steering Rods
> >   Steering UJ's
> >   Radius Rod Bush( standard and uprated)
> >   Top Ball joint
> >   Panhard Rose Joint
> >   Prop shaft UJ
> >   Bump Stop
> >   Quarter Glass
> >   Windscreen
> >   Rear Screen Perspex
> >   Screen Gasket Front/ Rear
> >   Chrome Filler Strip
> >   Headlamp Cover Rubber
> >   Rain Gutter
> >
> >
> > We also have an updated complete front Brake Caliper
> > Kit which comes with
> > all lines and fittings and gives approximately 50%
> > more Pad area with 4 Pot
> > Calipers. Best of all it is a bolt on with NO
> > modifications to the supension
> > or uprights.
> >
> > also a complete range of uprated supension bushes to
> > improve the handling,
> > from fast  road to race.
> >
> > Finally as we find improvements from our racing
> > program which can be
> > translated to road use we will pass on that
> > information for customers.
> >
> > Last but not least these are the cities we will
> > visit on our road trip.
> > Atlanta, Indianapolis, Kansas City, Denver, Colorado
> > Springs, Las Vegas, Los
> > Angeles, San Francisco, Portland, Seattle.
> > So if you are on route we can deliver at a very
> > modest cost.
> >
> >
>_________________________________________________________________
> > Cell phone \ufffdswitch\ufffd rules are taking effect \ufffd find
> > out more here.
> > http://special.msn.com/msnbc/consumeradvocate.armx
> >
> >
> > ------------------------ Yahoo! Groups Sponsor
> >
> > To unsubscribe from this group, send an email to:
> > MarcosManiacs-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
>__________________________________
>Do you Yahoo!?
>Protect your identity with Yahoo! Mail AddressGuard
>http://antispam.yahoo.com/whatsnewfree
>
>
>To unsubscribe from this group, send an email to:
>MarcosManiacs-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

_________________________________________________________________
Wonder if the latest virus has gotten to your computer? Find out. Run the 
FREE McAfee online computer scan! 
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

Bob,

I am not sure if I confirmed your order. I will let you have the final price 
including shipping when I have the final ship costs.

Garry


>From: Bob Magnotti <rhdspritemk1@...>
>Reply-To: MarcosManiacs@yahoogroups.com
>To: MarcosManiacs@yahoogroups.com
>Subject: Re: [MarcosManiacs] Marcos Parts USA in business.
>Date: Fri, 12 Dec 2003 18:29:25 -0800 (PST)
>
>Gary,
>
>Please let me know what the cost will be for the
>following parts to be shipped to Northern Virginia.
>
>   Door Seal 2ea
>   Boot( Trunk) Seal
>   Bonnet Rubber
>   Headlamp Cover 2ea, not the ones with rubber
>mounting
>   Hand Brake Cable (Wood Chassis only)
>   Steering Rose Joint 2ea
>   Rain Gutter both sides
>
>Thanks for the efforts you are putting into USA
>Marcos.
>Bob Magnotti
>
>
>--- Garry Diver <garrydiver@...> wrote:
> > Hi Everyone,
> >      Finally my container has arrived and I am
> > pleased to say that Rory and
> > I have reached agreement that MarcosParts USA will
> > be the exclusive stocking
> > disributor for Marcos parts in the US and Canada.
> >
> > In setting up the operation I have tried to stock
> > both the most in demand
> > items plus the difficult to ship ones such as
> > Windscreens. Obviously we
> > cannot hold every part as the population of Marcos
> > cars in North America is
> > quite small, but as we ship containers three or four
> > times a year from the
> > UK we can always handle one off requirements.
> >
> > By way of background, Marcos Parts USA is part of
> > Chevron Tiga cars which is
> > based in Jupiter Florida. We design, build and
> > restore Race cars and supply
> > parts and service for Chevron, Tiga, Lola and now
> > Marcos cars. While the
> > emphasis is on vintage and historic racing we also
> > restore Lotus and other
> > British makes.
> >
> > I am currently restoring a 1969 Marcos 3 ltr. ford
> > for vintage racing and my
> > partner was a very successful Marcos racer in the
> > 1970's.
> >
> > This means that we can offer advice and support for
> > performance upgrades and
> > will offer some of these in addition to the standard
> > Marcos spares.  We will
> > also offer parts not easily sourced in the US and
> > Canada which are not
> > standard Marcos parts.
> >
> > I will make a proper  parts and price list available
> > in the near future but
> > the following is the currently available stock.
> >
> > I cannot finalize the prices until I have the final
> > numbers on shipping and
> > duty etc.,  but I am issuing this list as our
> > transporter is making a trip
> > to the West Coast and back leaving 16th Dec. This
> > means that there is a
> > chance for delivery at much reduced rates to normal,
> > in time for the
> > holidays.
> >
> > Here are the available parts;
> >
> >   50mm wheel Badge
> >   Door Hinge Bush
> >   Door Push Button
> >   Door Seal
> >   Boot( Trunk) Seal
> >   Bonnet Rubber
> >   Headlamp Cover
> >   Headlamp Cover Clip
> >   U section ( for above)
> >   Pedal Box
> >   Pedal Box Cover
> >   Pedal Box UJ
> >   Clutch Master Cyl.
> >   Wheel Cylinder
> >   Boot Badge
> >   Hand Brake Cable (Wood Chassis only)
> >   Brake light Switch
> >   Chassis Bung
> >   Chassis Sponge
> >   Engine Mounting V6, V8, 1600
> >   Gearbox Mounting V6, 1600
> >   Water Pump V6, Volvo
> >   Heater Ducting
> >   Headlamp Inner/Outer round only
> >   Headlamp bowl
> >   Horn pencil
> >   Rear lamps 1800
> >   Exhaust Manifold gasket
> >   Fuel Filler Cap
> >   Grommet
> >   Throttle Cable
> >   Speedo Cable
> >   Checkstrap and Hooks
> >   Steering Rose Joint
> >   Steering Rods
> >   Steering UJ's
> >   Radius Rod Bush( standard and uprated)
> >   Top Ball joint
> >   Panhard Rose Joint
> >   Prop shaft UJ
> >   Bump Stop
> >   Quarter Glass
> >   Windscreen
> >   Rear Screen Perspex
> >   Screen Gasket Front/ Rear
> >   Chrome Filler Strip
> >   Headlamp Cover Rubber
> >   Rain Gutter
> >
> >
> > We also have an updated complete front Brake Caliper
> > Kit which comes with
> > all lines and fittings and gives approximately 50%
> > more Pad area with 4 Pot
> > Calipers. Best of all it is a bolt on with NO
> > modifications to the supension
> > or uprights.
> >
> > also a complete range of uprated supension bushes to
> > improve the handling,
> > from fast  road to race.
> >
> > Finally as we find improvements from our racing
> > program which can be
> > translated to road use we will pass on that
> > information for customers.
> >
> > Last but not least these are the cities we will
> > visit on our road trip.
> > Atlanta, Indianapolis, Kansas City, Denver, Colorado
> > Springs, Las Vegas, Los
> > Angeles, San Francisco, Portland, Seattle.
> > So if you are on route we can deliver at a very
> > modest cost.
> >
> >
>_________________________________________________________________
> > Cell phone \ufffdswitch\ufffd rules are taking effect \ufffd find
> > out more here.
> > http://special.msn.com/msnbc/consumeradvocate.armx
> >
> >
> > ------------------------ Yahoo! Groups Sponsor
> >
> > To unsubscribe from this group, send an email to:
> > MarcosManiacs-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
>__________________________________
>Do you Yahoo!?
>Protect your identity with Yahoo! Mail AddressGuard
>http://antispam.yahoo.com/whatsnewfree
>
>
>To unsubscribe from this group, send an email to:
>MarcosManiacs-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

_________________________________________________________________
Winterize your home with tips from MSN House & Home. 
http://special.msn.com/home/warmhome.armx

Thanks again for your efforts.

Bob
--- Garry Diver <garrydiver@...> wrote:
> Bob,
> 
> I am not sure if I confirmed your order. I will let
> you have the final price 
> including shipping when I have the final ship costs.
> 
> Garry
> 
> 
> >From: Bob Magnotti <rhdspritemk1@...>
> >Reply-To: MarcosManiacs@yahoogroups.com
> >To: MarcosManiacs@yahoogroups.com
> >Subject: Re: [MarcosManiacs] Marcos Parts USA in
> business.
> >Date: Fri, 12 Dec 2003 18:29:25 -0800 (PST)
> >
> >Gary,
> >
> >Please let me know what the cost will be for the
> >following parts to be shipped to Northern Virginia.
> >
> >   Door Seal 2ea
> >   Boot( Trunk) Seal
> >   Bonnet Rubber
> >   Headlamp Cover 2ea, not the ones with rubber
> >mounting
> >   Hand Brake Cable (Wood Chassis only)
> >   Steering Rose Joint 2ea
> >   Rain Gutter both sides
> >
> >Thanks for the efforts you are putting into USA
> >Marcos.
> >Bob Magnotti
> >
> >
> >--- Garry Diver <garrydiver@...> wrote:
> > > Hi Everyone,
> > >      Finally my container has arrived and I am
> > > pleased to say that Rory and
> > > I have reached agreement that MarcosParts USA
> will
> > > be the exclusive stocking
> > > disributor for Marcos parts in the US and
> Canada.
> > >
> > > In setting up the operation I have tried to
> stock
> > > both the most in demand
> > > items plus the difficult to ship ones such as
> > > Windscreens. Obviously we
> > > cannot hold every part as the population of
> Marcos
> > > cars in North America is
> > > quite small, but as we ship containers three or
> four
> > > times a year from the
> > > UK we can always handle one off requirements.
> > >
> > > By way of background, Marcos Parts USA is part
> of
> > > Chevron Tiga cars which is
> > > based in Jupiter Florida. We design, build and
> > > restore Race cars and supply
> > > parts and service for Chevron, Tiga, Lola and
> now
> > > Marcos cars. While the
> > > emphasis is on vintage and historic racing we
> also
> > > restore Lotus and other
> > > British makes.
> > >
> > > I am currently restoring a 1969 Marcos 3 ltr.
> ford
> > > for vintage racing and my
> > > partner was a very successful Marcos racer in
> the
> > > 1970's.
> > >
> > > This means that we can offer advice and support
> for
> > > performance upgrades and
> > > will offer some of these in addition to the
> standard
> > > Marcos spares.  We will
> > > also offer parts not easily sourced in the US
> and
> > > Canada which are not
> > > standard Marcos parts.
> > >
> > > I will make a proper  parts and price list
> available
> > > in the near future but
> > > the following is the currently available stock.
> > >
> > > I cannot finalize the prices until I have the
> final
> > > numbers on shipping and
> > > duty etc.,  but I am issuing this list as our
> > > transporter is making a trip
> > > to the West Coast and back leaving 16th Dec.
> This
> > > means that there is a
> > > chance for delivery at much reduced rates to
> normal,
> > > in time for the
> > > holidays.
> > >
> > > Here are the available parts;
> > >
> > >   50mm wheel Badge
> > >   Door Hinge Bush
> > >   Door Push Button
> > >   Door Seal
> > >   Boot( Trunk) Seal
> > >   Bonnet Rubber
> > >   Headlamp Cover
> > >   Headlamp Cover Clip
> > >   U section ( for above)
> > >   Pedal Box
> > >   Pedal Box Cover
> > >   Pedal Box UJ
> > >   Clutch Master Cyl.
> > >   Wheel Cylinder
> > >   Boot Badge
> > >   Hand Brake Cable (Wood Chassis only)
> > >   Brake light Switch
> > >   Chassis Bung
> > >   Chassis Sponge
> > >   Engine Mounting V6, V8, 1600
> > >   Gearbox Mounting V6, 1600
> > >   Water Pump V6, Volvo
> > >   Heater Ducting
> > >   Headlamp Inner/Outer round only
> > >   Headlamp bowl
> > >   Horn pencil
> > >   Rear lamps 1800
> > >   Exhaust Manifold gasket
> > >   Fuel Filler Cap
> > >   Grommet
> > >   Throttle Cable
> > >   Speedo Cable
> > >   Checkstrap and Hooks
> > >   Steering Rose Joint
> > >   Steering Rods
> > >   Steering UJ's
> > >   Radius Rod Bush( standard and uprated)
> > >   Top Ball joint
> > >   Panhard Rose Joint
> > >   Prop shaft UJ
> > >   Bump Stop
> > >   Quarter Glass
> > >   Windscreen
> > >   Rear Screen Perspex
> > >   Screen Gasket Front/ Rear
> > >   Chrome Filler Strip
> > >   Headlamp Cover Rubber
> > >   Rain Gutter
> > >
> > >
> > > We also have an updated complete front Brake
> Caliper
> > > Kit which comes with
> > > all lines and fittings and gives approximately
> 50%
> > > more Pad area with 4 Pot
> > > Calipers. Best of all it is a bolt on with NO
> > > modifications to the supension
> > > or uprights.
> > >
> > > also a complete range of uprated supension
> bushes to
> > > improve the handling,
> > > from fast  road to race.
> > >
> > > Finally as we find improvements from our racing
> > > program which can be
> > > translated to road use we will pass on that
> > > information for customers.
> > >
> > > Last but not least these are the cities we will
> > > visit on our road trip.
> > > Atlanta, Indianapolis, Kansas City, Denver,
> Colorado
> > > Springs, Las Vegas, Los
> > > Angeles, San Francisco, Portland, Seattle.
> > > So if you are on route we can deliver at a very
> > > modest cost.
> > >
> > >
>
>_________________________________________________________________
> > > Cell phone \ufffdswitch\ufffd rules are taking effect \ufffd
> find
> > > out more here.
> > >
> http://special.msn.com/msnbc/consumeradvocate.armx
> > >
> > >
> > > ------------------------ Yahoo! Groups Sponsor
> > >
> > > To unsubscribe from this group, send an email
> to:
> 
=== message truncated ===


__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

Hi Larry,
  Well the container is still in line waiting X Ray although it should be 
out thursday. I expect it to arrive Jupiter Fri. so you could pickup Sat. I  
leave on my trip Sun. I will confirm When it actually arrives.

Garry


>From: larry meadows <lmeadowsw@...>
>Reply-To: MarcosManiacs@yahoogroups.com
>To: MarcosManiacs@yahoogroups.com
>Subject: Re: [MarcosManiacs] Marcos Parts USA in business.
>Date: Fri, 12 Dec 2003 06:03:58 -0800 (PST)
>
>Good morning,
>Larry Meadows, here.
>What is the status of my pallet of parts? I will be able to come over and 
>pick them up between Dec.16th and 20th, or any time after Jan.7th.
>You had said you might be able to deliver them here at Wimauma. If so those 
>dates would also be good.
>Regards,
>Larry
>#5536
>
>
>---------------------------------
>Do you Yahoo!?
>New Yahoo! Photos - easier uploading and sharing

_________________________________________________________________
Worried about inbox overload? Get MSN Extra Storage now!  
http://join.msn.com/?PAGE=features/es