Front end alignment
2005-05-13 by mgacoupe1959
Hi all, I plan to get the front end of my '70 Marcos aligned next week. Does anyone have the specs i.e. caster, camber, toe in, or any advice I can give the alignment shop?? Thanks Michael
Thread
Front end alignment
Re: Front end alignment
2005-05-14 by Don Lattimer
Michael, Castor: 6 degrees Camber: 0 degrees Toe-in: 1/16" to 1/8" Don --- In MarcosManiacs@yahoogroups.com, "mgacoupe1959" <mgacoupe@h...> wrote: > Hi all, > I plan to get the front end of my '70 Marcos aligned next week. Does > anyone have the specs i.e. caster, camber, toe in, or any advice I can
Show quoted textHide quoted text
> give the alignment shop?? > Thanks > Michael
RE: [MarcosManiacs] Re: Front end alignment
2005-05-15 by Robert Carroll
Hey Don, Do you know if these specs are the same for a '69 wood chassis? -Bob
Show quoted textHide quoted text
-----Original Message----- From: MarcosManiacs@yahoogroups.com [mailto:MarcosManiacs@yahoogroups.com] On Behalf Of Don Lattimer Sent: Saturday, May 14, 2005 4:35 PM To: MarcosManiacs@yahoogroups.com Subject: [MarcosManiacs] Re: Front end alignment Michael, Castor: 6 degrees Camber: 0 degrees Toe-in: 1/16" to 1/8" Don --- In MarcosManiacs@yahoogroups.com, "mgacoupe1959" <mgacoupe@h...> wrote: > Hi all, > I plan to get the front end of my '70 Marcos aligned next week. Does > anyone have the specs i.e. caster, camber, toe in, or any advice I can > give the alignment shop?? > Thanks > Michael _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/MarcosManiacs/ * To unsubscribe from this group, send an email to: MarcosManiacs-unsubscribe@yahoogroups.com <mailto:MarcosManiacs-unsubscribe@yahoogroups.com?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.
Re: [MarcosManiacs] Re: Front end alignment
2005-05-15 by Meggsief@aol.com
Ditto Don,
On the 66and the 69 wood chasis is that the optimal setting?
Hal
#5353/#5006Re: Front end alignment
2005-05-15 by Don Lattimer
Yes, those specs are for a 1969 wood chassis. I use the same on my 1971 steel chassis vehicle and it works fine. I had to play with the camber a little with my 16 inch wheels/tires but I'm only at about 2 degrees. Don #3m5759