Mellotronists

Hi all-
 
Some say to unplug the lead from the head block to the preamp, whether
the block comes out or not. Is this also a "must"?
 
Jim 
 
M400 #917

	-----Original Message-----
	From: lsf5275@... [mailto:lsf5275@aol.com] 
	Sent: Friday, September 19, 2003 7:36 AM
	To: mellotronists@yahoogroups.com
	Subject: RE: [Mellotronists] Demagging Heads
	
	
	I have found that removing the headblock to demagnetize is not
necessary. But, if you should do so, be sure to short across the
contacts of the receiver plug at the back of the preamp box before you
plug the headblock back in or you run the risk of magnetizing the
headblock all over again... and the correct procedure is to only
demagnetize one head at a time.
	
	just my 2 cents.
	
	Frank Stickle 
	
Yahoo! Groups Sponsor	
ADVERTISEMENT
click here
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=1707
709858:HM/A=1706996/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?c
ode=30509&media=atkins> 	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egrou
pmail/S=:HM/A=1706996/rand=584521355> 	

	To unsubscribe from this group, send an email to:
	Mellotronists-unsubscribe@yahoogroups.com
	
	
	
	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> . 
	


This message (including any attachments) may contain confidential information intended for a specific individual and purpose. If you are not the intended recipient, delete this message. If you are not the intended recipient, disclosing, copying, distributing, or taking any action based on this message is strictly prohibited.