Modular Synth Panels

On 5/21/08, Scott Deyo put forth:
>Wow, good work Mark!
>
>Thanks for all the info -- very handy.

Thanks :)  Does this mean you are going to offer a primate synthesis
version?? ;)

Imho, the biggest change is the cathode bypass cap.  If you have
one (without a bypass cap) you could test it by sending a signal in
the low audio range, turning up the gain pot, and checking the
cathode for an AC voltage.  If you have a scope with two channels and
find a signal on the cathode out of phase with the input signal, then
that would demonstrate negative feedback.

Anyway, I might roll all my posts together -- including all the
explanations -- and put it up on the CGS forum on Electro-Music.
Although, that might take longer to type than it did to build the
module :)