Modular Synth Panels

I am. I have the layout done and will upload it this weekend, I hope.
IIRC it has 10 jacks, 7 pots, 3 switches.

Scott Deyo
contact@...
The Bridechamber
www.bridechamber.com
Jealous Edison Record Kompany
www.jealousedison.com




On Oct 3, 2009, at 8:33 AM, Richard Brewster wrote:

> Is Bridechamber doing a MOTM panel for this?
>
> Richard Brewster
> http://pugix.com
>
> Ross Stapf wrote:
> >
> >
> > I've built one. I have another half finished. The only problem is
> > the led's.
> > http://www.electro-music.com/forum/topic-26503-25.html Look at this
> > thread, page 2 about half way down is when the MOTM version is
> > discussed. There is a part list for the euro version on page 1  
> that I
> > used and it was right for the most part.
> >
> > It is well labeled and was pretty easy to build. Again see the
> > instructions Andrew F posted to fix this. Other folks mention a
> > problem with the euro boards. I did not have this issue. The only
> > problem I had was with the LED's and the fix Andrew F gave works  
> just
> > fine.
> >
> > This was the first project I did without step by step  
> instructions. I
> > had been doing diy for less than a year when I finished it. I used
> > Sduck's panel layout.
> >
> > Ross
> >
> >
>
>
>