PLAN B analog blog

hello peter,

another idea for a converted miniwave:
i've read about an expansion board for
the miniwave, capable of holding several
additional eproms. how about adding such
a board to your miniwave conversion? that
would be interesting especially for those
who can't do diy stuff on their own (like me).

best wishes

ingo



--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure 
that out)" <peter@b...> wrote:
> 
> I am creating another poll for a euro rack conversion of the 
> Blacet/Wiard Miniwave.  I have successfully made this 
> conversion in my own system and have been contracted to do 
> another for one specific customer.  Again, I run it up the Plan B 
> flagpole to see who salutes.
> 
> There could be two flavors available:
> 
> 1) Std Miniwave (faceplate conversion only)
> 
> 2)  Wave/Bank pulse outputs (additional $60.   By adding two 
> ACB boards (used on the Milton sequencer), a Miniwave can be 
> fitted with two extra outputs which will fire a 20ms pulse out 
> whenever a change or bank or wave is selected by either the 
> faceplate controls or voltage control.
> 
> Please note:  in that this will utilize the Blacet PCBA - expect a 
> module depth of 5.25 inches (140 mm).
> 
> There is a picture in the PHOTOS section of the first conversion 
> (from my system) which in this picture does NOT have the ACB 
> option.  They have been subsequently added.