PLAN B analog blog

I am creating another poll for a euro rack conversion of the 
Blacet/Wiard Miniwave.  I have successfully made this 
conversion in my own system and have been contracted to do 
another for one specific customer.  Again, I run it up the Plan B 
flagpole to see who salutes.

There could be two flavors available:

1) Std Miniwave (faceplate conversion only)

2)  Wave/Bank pulse outputs (additional $60.   By adding two 
ACB boards (used on the Milton sequencer), a Miniwave can be 
fitted with two extra outputs which will fire a 20ms pulse out 
whenever a change or bank or wave is selected by either the 
faceplate controls or voltage control.

Please note:  in that this will utilize the Blacet PCBA - expect a 
module depth of 5.25 inches (140 mm).

There is a picture in the PHOTOS section of the first conversion 
(from my system) which in this picture does NOT have the ACB 
option.  They have been subsequently added.

hello peter,

another idea for a converted miniwave:
i've read about an expansion board for
the miniwave, capable of holding several
additional eproms. how about adding such
a board to your miniwave conversion? that
would be interesting especially for those
who can't do diy stuff on their own (like me).

best wishes

ingo



--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure 
that out)" <peter@b...> wrote:

> 
> I am creating another poll for a euro rack conversion of the 
> Blacet/Wiard Miniwave.  I have successfully made this 
> conversion in my own system and have been contracted to do 
> another for one specific customer.  Again, I run it up the Plan B 
> flagpole to see who salutes.
> 
> There could be two flavors available:
> 
> 1) Std Miniwave (faceplate conversion only)
> 
> 2)  Wave/Bank pulse outputs (additional $60.   By adding two 
> ACB boards (used on the Milton sequencer), a Miniwave can be 
> fitted with two extra outputs which will fire a 20ms pulse out 
> whenever a change or bank or wave is selected by either the 
> faceplate controls or voltage control.
> 
> Please note:  in that this will utilize the Blacet PCBA - expect a 
> module depth of 5.25 inches (140 mm).
> 
> There is a picture in the PHOTOS section of the first conversion 
> (from my system) which in this picture does NOT have the ACB 
> option.  They have been subsequently added.