QTR-Quadtone RIP

That must be a typo. You want the calibration slider set to 100 to determine how the paper responds to a full ink load. Measuring the step wedge that's printed will then help you determine where to set the ink limit for the paper. You will set the calibration slider to the ink limit value when you make your second calibration print. 

Terry. 

On 2012-01-17, at 8:36 PM, "Keith" <kjrslr@...> wrote:

> "To print the first Ink Separation Test Page, place a piece of the paper for
> which the Curve will be designed in the printer, make sure the calibration
> slider is ALL THE WAY TO THE LEFT(100), click the Print button and you're
> off."
> 
> However in the ink calibration box(in the calibration mode) the slider is all the way to THE RIGHT and the box indicates 100.
> So which why should the slider be placed? All the way to the left, indicating 1, or all the way to the right, indicating 100.
> 
> So which is it?