QTR-Quadtone RIP

Hi Alan,
I will send some screen shots thought soon. Can you please confirm what inkseparation file you are printing? I was using the inkseparation8.tif from the images folder as this has the 8 inks for the epson 4800. 
On a slightly different note, the epson driver works pretty well. I custom profiled the paper i use using the 51 step grey tif and load this profile in CS5 when printing. Results are amazing!! Am I going to see better results with QTR?
Thanks

--- In QuadtoneRIP@yahoogroups.com, Alan Vlach <alanvlach@...> wrote:
>
> can you send screen shots of the print dialog boxes?
> 
> On Feb 13, 2012, at 1:33 PM, bkeesinguk wrote:
> 
> > Thanks for the reply but this does not work either?? I get all sorts of colours across each band. For instance the cyan band starts with a green then goes to blue then brown then purple then magenta??
> > The rest of the bands are similar? Strange
> > 
> > Can anyone help??
> > 
> > Thanks
> > 
> > --- In QuadtoneRIP@yahoogroups.com, Alan Vlach <alanvlach@> wrote:
> > >
> > > This works for me with 10.6.8 and Photoshop CS5:
> > > 
> > > Open the ink separation page and assign a profile of Adobe RGB (1998)
> > > Print from Photoshop with the following settings:
> > > Document : (Profile: Adobe RGB (1998))	
> > > Color Handling: Photoshop Manages Colors
> > > Printer Profile: Adobe RGB(1998)
> > > Rendering Intent: Relative Colorimetric	
> > > Black Point Compensation: Off
> > > Do use the calibration mode in the QTR dialog box.
> > > 
> > > 
> > > Good luck
> > > 
> > > On Feb 11, 2012, at 11:41 AM, bkeesinguk wrote:
> > > 
> > > > Hi, I am new to QTR and have a couple of issues. Firstly I am using a Mac with 10.6.8 with epson pro 4800.
> > > > I am wanting to print the inkseparation.psd to establish the ink limits. All the inkseperation files in the images folder seem to have magenta lines and not there proper colours? Am I missing something here?
> > > > When opening the tif or psd file they do not have any embedded profile so do I leave as is?
> > > > Also can you please confirm that you print this using the calibration setting from the QTR 4800 printer setings?
> > > > 
> > > > Thanks
> > > > 
> > > > Brett
> > > > 
> > > > 
> > > 
> > > 
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> > 
> > 
> 
> 
> 
> [Non-text portions of this message have been removed]
>