QTR-Quadtone RIP

You can use Qimage, but you have to output to file rather than printer. 
Qimage remains limited to only 8 bits per channel output, even in the 
latest version. Mike Chaney remains adamant there is no need for it. You 
should set the printer ICC to QTR_RGB_Matte_Paper (or ..._Photo_Paper if 
using lustre/glossy paper of course) - some older versions of Qimage 
have problems with the QTR_Gray_ profiles) and probably set the target 
ppi to 360.
I usually have sharpen set to 4 rather than the default 5, but thats 
just personal preference
I can't help with which curves to use, sorry, as I have no experience 
with either that printer or that inkset. You'll probably eventually need 
to create your own.

On 15/02/2012 20:09, kaiyen.rm wrote:
>
>
> I am on:
> Windows Vista 64 bit
> Qimage
> QTR(gui)
> Epson 2200
> UT3D inkset
>
> For example:
> -editing of photo only in PS? Can I output from Qimage?
> -seems I have to set it to greyscale before printing, right?
> -does it matter what I pick for settings in QTR, just to get started,
> based on the above inkset/printer combo (which is not one of the ones
> listed)?
>
-- 
mike finley photography
http://www.mikefinley.co.uk
http://words.mikefinley.co.uk