QTR-Quadtone RIP

Hi Dick,

Windows still runs printing off a service - you can start, stop, and restart the services from the services.msc application.  I'm doing this all on my windows xp VM:

Go to Start -> Run ->  type in services.msc and hit enter

You can find the print spooler in here and control it by clicking on it and selecting stop (if it's started) and restart from the left hand side of the window.

If this doesn't work, the print spooler might need to be re-installed:

http://social.technet.microsoft.com/Forums/en/winserverfiles/thread/6de177db-df34-4801-be93-1a8e4231f183

You might try booting off your windows install cd and see if you need to run a repair on the operating system, as well (this is much easier than completely reinstalling the OS).

Good luck and I hope this helps!

Nick

--- In QuadtoneRIP@yahoogroups.com, "richard Sullivan" <richsul@...> wrote:
>
> Thanks. I checked out the link but it does not seem to apply to me as I am
> not using a print server, at least I don't think so. I cannot get any
> configuration stuff like profiles, printers etc. None of the drop downs
> work. I get the error on boot up not when calling a printer.  I also turned
> off Norton's firewall.
> 
>  
> 
> --Dick Sullivan
> 
>  
> 
> From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
> Behalf Of nmenghardt
> Sent: Thursday, March 08, 2012 7:13 AM
> To: QuadtoneRIP@yahoogroups.com
> Subject: [QuadtoneRIP] Re: I am getting error code 1722
> 
>  
> 
>   
> 
> I'm generally Mac oriented but I've done some Windows server work in the
> past.
> 
> Have you tried restarting the spooler service? Also, you might try
> reinstalling the printer that is having this issue.
> 
> Reboot, Check spooler service
> 
> or
> 
> Uninstall printer, reboot, reinstall printer, reboot, try printing.
> 
> You can check the services by following this post:
> 
> http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/8b959
> 71d-d98f-4986-95b8-b2bbe46c5452/
> 
> I don't know if you've tried these steps as you weren't specific as to what
> steps you've taken to resolve the issue.
> 
> Hope this helps!
> 
> --- In QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com> ,
> "richsul" <richsul@> wrote:
> >
> > Seems to be a remote procedure call RPS service unavailable. I have done
> quite a few things recommend to fix it but it still persists. When I go to
> administrative services it says it is active and not disabled.
> > 
> > I've uninstalled and re installed current and previous versions and
> rebooted a number of times.
> > 
> > Any ideas?
> > 
> > Thanks Dick Sullivan
> >
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>