QTR-Quadtone RIP

I'm wondering if this is actually something to do with the paper and not the printing, as it seems to be the same distance in from each edge.

--- In QuadtoneRIP@yahoogroups.com, Mike Finley <mike.finley@...> wrote:
>
> Glad that one of the problems is fixed :)
> I can't help with the longitudinal streaking, except to say the only 
> time I've seen something that might have been that is when using a 
> profile that lays down too much ink (eg using a profile intended for a 
> heavy cotton paper with plain paper). This would be consistent with it 
> only appearing in dark areas. Someone else may have a better suggestion!
> 
> On 27/02/2013 13:48, rossfmj wrote:
> >
> > Thanks Mike
> >
> > I've found the alignment utility and have reset the alignment. I can't 
> > see any micro banding now. However the longitudinal "streaking" is 
> > still visible. This appears t only affect about 3" in from the left 
> > side in areas of uniform dark tone. Still non plussed, as it is 
> > noticeable in landscape and portrait mode. i.e. parallel to the left 
> > edge in terms of paper transit and also parallel to the bottom edge????
> >
> > Ross
> > .
> >
> >
> > 
> 
> -- 
> mike finley photography
> http://www.mikefinley.co.uk
> http://words.mikefinley.co.uk
> http://www.roguegenegallery.com/Mike_Finley-gallery.html
> 
> 
> 
> [Non-text portions of this message have been removed]
>