QTR-Quadtone RIP

Hmmm.  Tried a different batch of paper and it's still happening??

--- In QuadtoneRIP@yahoogroups.com, "rossfmj" <ross.jarvis@...> wrote:
>
> I'm wondering if this is actually something to do with the paper and not the printing, as it seems to be the same distance in from each edge.
> 
> --- In QuadtoneRIP@yahoogroups.com, Mike Finley <mike.finley@> wrote:
> >
> > Glad that one of the problems is fixed :)
> > I can't help with the longitudinal streaking, except to say the only 
> > time I've seen something that might have been that is when using a 
> > profile that lays down too much ink (eg using a profile intended for a 
> > heavy cotton paper with plain paper). This would be consistent with it 
> > only appearing in dark areas. Someone else may have a better suggestion!
> > 
> > On 27/02/2013 13:48, rossfmj wrote:
> > >
> > > Thanks Mike
> > >
> > > I've found the alignment utility and have reset the alignment. I can't 
> > > see any micro banding now. However the longitudinal "streaking" is 
> > > still visible. This appears t only affect about 3" in from the left 
> > > side in areas of uniform dark tone. Still non plussed, as it is 
> > > noticeable in landscape and portrait mode. i.e. parallel to the left 
> > > edge in terms of paper transit and also parallel to the bottom edge????
> > >
> > > Ross
> > > .
> > >
> > >
> > > 
> > 
> > -- 
> > mike finley photography
> > http://www.mikefinley.co.uk
> > http://words.mikefinley.co.uk
> > http://www.roguegenegallery.com/Mike_Finley-gallery.html
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
>