QTR-Quadtone RIP

I assume that the newer 17" models are better than the 4000 with respect to
matte paper dmax.  My 7800 is better than the 7600 was.  But, a list member
still noticed that the dmax of his 4800 was not up to the 1400 -- likewise
for my 7800 v. 1400.  I'm not sure if it is the 1.5 pl drop that gives the
1400 type it's dmax advantage or what.  That said, I find my 7800 matte
paper dmax to be fine; not so with the 4000.  So, I've generally been
pointing people to the 4800 for 17" Eboni-6, with the caveat that I've
never used a 4800.

At any rate, if 16x20 is your top size, I would probably avoid the 24"
printers.  Having both, I find the 17" model easier to live with.  Part of
it is just the space required, but I also like the paper tray setup.

Paul
www.PaulRoark.com


On Sun, May 19, 2013 at 6:00 AM, jcphoto52 <jacques.caron@...>wrote:

> **
>
>
> I would go for a larger size since, when using QTRip, I have to leave at
> least a 1 inch border (actually closer to 1,25" to be sure), as to avoid
> micro banding. On a 17" printer, making a 16x20, it would be nice to check
> first if everything is OK.
>
> Good luck
>
>
> --- In QuadtoneRIP@yahoogroups.com, "kenleegallery" <kenlee333@...> wrote:
> >
> > Additional cost aside, would it be better to purchase a different model,
> or an even larger printer, even if we only plan to make 16x20 prints ?
> Would there be other advantages, like DMax, greater resolution, better
> image fidelity, etc. ?
> >
> >
> > --- In QuadtoneRIP@yahoogroups.com, Paul Roark <roark.paul@> wrote:
> > >
> > > I found that the Epson 4000 has a weak dmax with Eboni on the matte
> papers
> > > I like. It would be nice if we could gather the dmax numbers for the
> 17"
> > > printers using Eboni on some standard matte paper(s) -- Epson Hot Press
> > > Natural would be ideal.
> > >
> > > Paul
> > > www.PaulRoark.com
> > >
> > > On Fri, May 17, 2013 at 11:21 AM, kenleegallery <kenlee333@> wrote:
> > >
> > > > **
> > > >
> > > >
> > > > Now that I have made some pleasing images with QTR and Eboni 6 inks
> using
> > > > an Epson 1430, I'd like to make some 16x20 prints and am looking for
> a
> > > > printer.
> > > >
> > > > Is there a particular model that is recommended - or any that are
> best
> > > > avoided ?
> > > >
> > > > Thanks in advance !
> > > >
> > > >
> > > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>
>  
>


[Non-text portions of this message have been removed]