Hi William,
You need to select both the .quad and the .txt files. Then drag
them both at the same time to the .exe program.
Roy
On Sat, Jul 11, 2015 at 12:31 AM, William Harvey will@crissart.net [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:
Dear Roy,
I am trying to use your QTR-linearize-Quad.exe program but I do not end up with the (Quad Curve)-lin.quad file that I expected.
I am doing the following: I place your program in the Eye-one folder. I drag the quad file that I want to re-linearize onto your program then I drag the linearization text file (lin.txt) onto your program which generates a file called lin-out.txt which looks like this:
QTR-Linearize-Quad version 2.7.6.0
File: C:\Program Files (x86)\QuadToneRIP\Eye-One\lin-out.txt
Step Dens Lab A B
0.00 0.070 93.93 0.00 0.00 - b L +
5.00 0.110 90.61 0.00 0.00 - b L +
10.00 0.140 88.18 0.00 0.00 - b L +
15.00 0.190 84.26 0.00 0.00 - b L +
20.00 0.240 80.48 0.00 0.00 - b L +
25.00 0.300 76.14 0.00 0.00 - b L +
30.00 0.370 71.32 0.00 0.00 - b L +
35.00 0.460 65.49 0.00 0.00 - b L +
40.00 0.540 60.64 0.00 0.00 - b L +
45.00 0.610 56.63 0.00 0.00 - b L +
50.00 0.690 52.31 0.00 0.00 - bL +
55.00 0.790 47.26 0.00 0.00 - L b +
60.00 0.890 42.59 0.00 0.00 - L b +
65.00 0.980 38.68 0.00 0.00 - L b +
70.00 1.070 35.03 0.00 0.00 - L b +
75.00 1.170 31.26 0.00 0.00 - L b +
80.00 1.270 27.76 0.00 0.00 - L b +
85.00 1.390 23.91 0.00 0.00 - L b +
90.00 1.470 21.54 0.00 0.00 - L b +
95.00 1.540 19.57 0.00 0.00 - L b +
100.00 1.600 17.97 0.00 0.00 - L b +
What am I doing wrong?
Cheers
On 7/11/2015 2:29 AM, Roy Harrington roy@harrington.com [QuadtoneRIP] wrote:
Finally got the PC version going. You need to put the .exe file in the samefolder with all the .exe's like QTR-Linearize-Data.exe -- its the QuadToneRIP\Eye-One\ folder.You can grab the two files (.quad and .txt) from anywhere on disk.https://www.dropbox.com/s/7vmo1nwlj3s57e0/QTR-Linearize-Quad.exe?dl=0
Roy
On Tue, Jun 9, 2015 at 4:07 PM, Roy Harrington <roy@harrington.com> wrote:
There seems to be a fair amount of interest in re-linearizing existing .quad curves.So looked into it and created a new droplet program QTR-Linearize-Quad that does this.The droplet takes two files -- a .quad file that you wish to re-linearize and ameasurement file i.e. .txt file like the usual QTR-Linearize-Data takes.This is basically equivalent to adding a LINEARIZE line to a curve descriptor file.The output .quad file will have the same name with "-lin" appended to curve name.
This gives you the capability of linearizing Piezo .quad files and also allowing asecond linearizing of the standard curves -- i.e. you can have a linearized curvebut fine-tune the linearize with a second one.
The plan is for this in the next version but I currently have a Mac version thatcan be tried out. Here's a link to the droplet application:
Comments welcome.Roy
--
--
--
William Harvey
Mas de Cazes
Parisot 82160
France
05-63-24-19-36
+33 5 63-24-19-36
Long. = 44° - 15' - 4.7" N
Lat. = 01° - 50' - 39" E