QTR-Quadtone RIP

Thanks Tom.

After one enters the values and linearizes should the
density values have changed in the linearization tab? 
I don't believe the curves I've created had different
values after linearization.

Tom

--- Tom Moore <r.t.moore@...> wrote:

> If you are going to re-linearize a curve that has
> already been linearized,
> make sure you clear out the linearized values before
> printing the stepwedge.
> On the PC the process for re-linearizing an existing
> curve is:
> 
>  
> 
> 1.	opening the curve in the curve creation window
> 2.	in the Linearize Tab, selecting the clear button
> 3.	saving the curve under a new name (not absolutely
> necessary, but a
> good idea so you don't over-write the existing
> curve)
> 4.	selecting the Create Curve
> 5.	printing the stepwedge with the new curve
> 6.	measuring the densities (or L* values) for the
> new curve
> 7.	entering the new densities into the Linearization
> Tab
> 8.	doing a create curve again
> 
>  
> 
> You should now have a linearized curve.