QTR-Quadtone RIP

Hi

I used one of yours : Eb6-EpsHpn-T (this one was OK) and for the first print a profile that I linearized from yours : Eb6-EpsHpn-T-lin.

If I look at both quad profiles (using QTRView), they look almost the same so the input to Print Tool must be very close.

Jacques


Jacques Caron
Photographe
jacques.caron@...



Le 2016-01-15 à 10:47, Paul Roark roark.paul@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> a écrit :

> 
> 
> ​Which profiles were used?
> 
> Paul
> www.PaulRoark.com ​
> 
> On Fri, Jan 15, 2016 at 6:15 AM, jacques.caron@....ca [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:
>  
> 
> Hi
> 
> 
> 
> Is it possible that a profile goes bad?
> 
> 
> 
> Explanation: I printed a 13x19 on an Epson 1430 fitted with the standard Eb-6 inks; I used Print Tool to select a profile and sent the task to the printer. Unfortunately, the print was almost black (but the whites were OK). I immediately reprinted the same picture, using Print Tool and this time, selected a profile very close to the one I used. Perfect print!!!
> 
> 
> 
> I'll have to refill the printer since the first print almost drained the black cartridge.
> 
> 
> 
> What could be the cause of this behaviour?
> 
> 
> 
> Many thanks
> 
> 
> 
> To see the prints :
> 
> https://dl.dropboxusercontent.com/u/41606691/Print_01.jpg
> 
> https://dl.dropboxusercontent.com/u/41606691/Print_02.jpg
> 
> 
> 
> 
> 
> 
> 
>