QTR-Quadtone RIP

For the SC-P600 printer, the smaller unit,      to set the platen gap wide.

On the Printer control panel use Tools/Maintenance/Thick paper,    Set Thick paper to ”On”.

Note that the original setting is resumed when the printer is switched off.

Details in the manual under “Using the Control Panel”.

I would expect the SC-P800 to have a similar option.

Cheers,

Jim Thyer


From: stephan.bruehl@... [QuadtoneRIP] 
Sent: Tuesday, November 8, 2016 2:21 AM
To: QuadtoneRIP@yahoogroups.com 
Subject: [QuadtoneRIP] paper settings with QTR for SC-P800

  

I miss the possibility to control the explicit paper settings for the SC-P800, since there is no way to do this directly on the printer control panel (like before with the 3800). I have had issues with head strikes on roll paper (Ilford IGFS) and need to set the platen gap to "wide" and also explicitly define the paper thickness. All this can be done with the Epson print driver, but how can I do it with QTR ???




Best, Stephan