QTR-Quadtone RIP

This is most likely an issue with a curve.

I suggest re-installing QTR as the first bet, and then looking through your curves for anything funny, and re-installing them properly.

https://piezography.com/install-delete-quadtonerip-curves/

best,
Walker


> On Jun 6, 2017, at 11:27 PM, Keith Schreiber keith@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:
> 
> 
> Hi Peter,
> 
> I see - it seems what you are experiencing is different than what happens to me now and then. This does sound like something I've seen before, though. Erik's suggestion may be on the right track. If you copy and paste the contents of the .txt file here, maybe someone will spot a problem.
> 
> Cheers,
> Keith
> 
> Keith Schreiber
> jkschreiber.com
> 
> 
> 
> 
>> On Jun 6, 2017, at 8:23 PM, petercasten@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:
>> 
>> Keith,
>> 
>> 
>> Thanks for your question.  
>> 
>> Yes, I tried reloading the Pictorico numerous times in both the top sheet feeder and rear sheet feeder.  It does not appear to be a problem with the Pictorico being misaligned upon entry into the printer, because the printer pulls the Pictorico into the printer properly as though it is going to print, but then waits about 15-20 seconds, and then the Pictorico exits through the front of the printer as a normal print would exit, except with nothing on it.  During the 15-20 second waiting period, if I click on my printer icon at the bottom of my screen, I can see information is being transmitted as the percentage goes from 0-100% before the printer discharges the Pictoric with nothing on it.
>> 
>> In my experience, when the Pictorico enters the printer from the top sheet feeder misaligned, the printer immediately passes the film through the printer and an error message appears. I've had that problem many times in the past and I know it well, but my current problem seems to be a different one.
>> 
>> Thanks,
>> 
>> Peter
>> 
> 
> 
>