QTR-Quadtone RIP

I had seen this 1 inch margin discussion befor but hoped there was a better solution. If there really is a problem using QTR with the 1430 why is this printer being recommended by Paul Roark? I based my purchase soley on this recommendation and will not bevery happy to have such a work around needed. The epson driver works quit well although as others have noted has less detail in the lighter areas. I really want to use this machine with QTR and all of the controls available. Has Mr. Roark ever responded to this issue?
Bernard  

    On Tuesday, June 13, 2017 10:04 PM, "Jacques Caron jacques.caron@... [QuadtoneRIP]" <QuadtoneRIP@yahoogroups.com> wrote:
 

     Ditto hère

Envoyé de mon iTruc

> Le 13 juin 2017 à 21:25, mark sloane marksuesloane@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> a écrit :
> 
> The 1430 requires you to have at least a one inch margin on the leading edge going into the printer. 
> 
> 
> I'm told that the 1430, which I use and had the same problem, has firmware that prevents QTR from managing this issue. My banding issues were eliminated as soon as I started using the one inch margin.
> 
> 
> I'm not a techie so if I got something wrong, I hope somebody will correct me.
> 
> 
> 
> 
> Mark Sloane 
> (775) 276 - 5315
> 
> 
> 
> 
> 
> 
> 
> 
> 
> --------------------------------------------
> On Tue, 6/13/17, Bernard Wolf brooksveriwide@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:
> 
> 
> Subject: [QuadtoneRIP] Artisan 1430 w/QTR banding
> To: "QTR-Forum" <quadtonerip@yahoogroups.com>
> Date: Tuesday, June 13, 2017, 6:08 PM
> 
> 
> 
> 
> 
>