QTR-Quadtone RIP

Walker,Thanks, I will give that a try. Cheers, John 

    On Tuesday, September 12, 2017 6:37 PM, "'forums@...' forums@walkerblackwell.com [QuadtoneRIP]" <QuadtoneRIP@yahoogroups.com> wrote:
 

     I’m not sure what printer you have but if you have anything other than a 1400/1430/1500W I’ve built new curves for the HDPK ink. I documented this on the other thread in the other forum (which I accidentally posted too not realizing it was that forum). Just use the master curve and linearize with your tools from Richard. That will do well.
Best,Walker




On Sep 12, 2017, at 8:59 PM, jthacker@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:
Walker,Thanks for the information. It is a bit too technical for me. I can read what you are saying and understand each sentence, I think, but I can't put it all together into an executable action. At this point, I'll try a second coat of overgloss, or the spray. If that doesn't work, I'll try a different paper or move back to the Epson all gray inks which I use for printing negatives. I'm less inclined to drive into piezographic tools or custom profiling since IJM does not seem to have any experience with my specific paper Harman Gloss Baryta.Cheers,John