Hi Tom, I'm using "UT" inks. No the UT7s. I was just wondering if the profiles had gotten switched somehow--and I'm actually have UT7 profiles that are misnamed as UT profiles. I double checked my download of QTR and I am definately using the profiles in the "UT" folder. I'll have to play around with it some more to find out what is going on... Thanks, Jon --- In QuadtoneRIP@yahoogroups.com, "Tom Moore" <r.t.moore@r...> wrote: > > Jon > > I don't recall you stating that you were using UT7 inks. They are definitely > different positions than the UT. > > So if you used a QTR UT curve with UT7 inks (or vice versa), you would get > very strange results. > > Tom > > > -----Original Message----- > > From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On > > Behalf Of Jon Witsell > > Sent: Wednesday, December 21, 2005 1:13 PM > > To: QuadtoneRIP@yahoogroups.com > > Subject: [QuadtoneRIP] Re: Anyone using QTR with MIS Ultratone Inks? > > > > Hi Tom, > > > > > > > Not having used IJC/OPM or UT inks (although I've used the UT7 with QTR > > on > > > my 2200), I don't have direct experience applicable to your problem. > > > However, since the ink positions can be somewhat arbitrary is it > > possible > > > that IJC/OPM expects inks in different position from that expected by > > the > > > QTR curve you tried? > > > > That is what I thought--but if you look at the ink config page here: > > > > http://www.inksupply.com/ut2200bh.cfm > > > > It appears that IJC/OPM and QTR profiles both should be set for that ink > > configuration. I > > would be an easy test just to swap the 50% and blue toner cart, but I have > > CFS and tubes > > get out of place. > > > > Hmmm... I think I just discovered something here: > > > > http://www.inksupply.com/ut7_2200.cfm > > > > I bet the mix up has to do with whether the inks are UT or UT7... I'll > > check when I get > > home. > > > > Thanks, > > > > Jon > > > > > > > > Just a thought... > > > > > > Tom Moore > > > > > > > -----Original Message----- > > > > From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] > > On > > > > Behalf Of Jon Witsell > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > >
Message
Re: Anyone using QTR with MIS Ultratone Inks?
2005-12-22 by Jon Witsell
Attachments
- No local attachments were found for this message.