QTR-Quadtone RIP

I think you could change the Model from "escp2-R220"  to "escp2-R200"
in the QuadR220.ppd file and the code would find the R200 driver.

Roy

On Sunday, May 14, 2006, at 02:22  PM, itafaber wrote:

> Does it work anyway if I change the priner model line in the ppd
> file?
> thank you!
> Fabrizio
>
> --- In QuadtoneRIP@yahoogroups.com, Roy Harrington <roy@...> wrote:
>>
>> Hi Howard,
>>
>> There isn't an R220 driver but the R200 driver should work fine.
>> Use the QuadR200 Printer Model and put your profiles under
>> QuadR200-fsfsn.
>>
>> Roy
>>
>> On Saturday, April 22, 2006, at 06:45  AM, Howard Shaw wrote:
>>
>>> I should add printing in calibration mode _was_ working fine.
> That
>>> is now failing with the same error.
>>>
>>> --- In QuadtoneRIP@yahoogroups.com, "Howard Shaw" <glassman@>
>>> wrote:
>>>>
>>>> I'm getting this error from QuadtoPrinter when trying to print
>>> using
>>>> a curve on my R220. Printing in Calibration mode works fine,
> just
>>>> not when using a curve.
>>>>
>>>> The log and the qidf file are below.
>>>>
>>>> Thanks for any assistance.
>>>> Howard
>>>>
>>>> ***** QTRgui Log *****
>>>>       Version 2.4.1.0
>>>>       Print by Print
>>>>       Execution Mode is Pipes
>>>>
>>>> ".\bin\ImageToRaster.exe" gui 0 0 1 "PPD=QuadR220.PPD
>>>> PRINTER=QuadR220-fsfsn MediaType=Matte Pagesize=A4
> topmargin=5.12
>>>> leftmargin=0.13 scale-percent=100 portrait=yes Resolution=2880
>>>> ColorModel=QTRIP" "C:\Program Files\QuadToneRIP\dinkla+Step-21-
>>>> gray.tif"
>>>> ".\bin\QuadToPrinter.exe" gui 0 0 1 "PPD=QuadR220.PPD
>>>> PRINTER=QuadR220-fsfsn MediaType=Matte Pagesize=A4
> Resolution=2880
>>>> RipSpeed=hispeed ColorModel=QTRIP ripCurve1=UT-
> FS_IlfClPearl_2880
>>>> ripCurve2=- ripBlend=100 stpDither=Ordered ripGamma=0
> ripLimit=0"
>>>> ".\bin\RawPrint.exe" "EPSON Stylus Photo R220 Series" -
>>>  "dinkla+Step-
>>>> 21-gray.tif"
>>>>
>>>> ***** ImageToRaster Log *****
>>>>       Version 2.2.1.0
>>>>
>>>> INFO: .\bin\ImageToRaster.exe gui 0 0 1 PPD=QuadR220.PPD
>>>> PRINTER=QuadR220-fsfsn MediaType=Matte Pagesize=A4
> topmargin=5.12
>>>> leftmargin=0.13 scale-percent=100 portrait=yes Resolution=2880
>>>> ColorModel=QTRIP C:\Program Files\QuadToneRIP\dinkla+Step-21-
>>> gray.tif
>>>> PPDFILE = .\ppd\QuadR220.PPD
>>>> DEBUG: Page = 595x842; 9,9 to 586,833
>>>> DEBUG: Searching for profile "2880/Matte"...
>>>> INFO: Loading image file...
>>>> DEBUG: ImageOpen("C:\Program Files\QuadToneRIP\dinkla+Step-21-
>>>> gray.tif", 1, 1, 100, 0, 0012F87C)
>>>> calling ReadTIFF
>>>> TIFFReadDirectory: Warning, C:\Program
>>> Files\QuadToneRIP\dinkla+Step-
>>>> 21-gray.tif: wrong data type 1 for "XMLPacket"; tag ignored.
>>>> TIFFReadDirectory: Warning, C:\Program
>>> Files\QuadToneRIP\dinkla+Step-
>>>> 21-gray.tif: unknown field with tag 34665 (0x8769) encountered.
>>>> DEBUG: TIFF resolution = 360.000000x360.000000, units=2
>>>> DEBUG: Stored resolution = 360x360 PPI
>>>> DEBUG: orientation = top-left
>>>> DEBUG: photometric = 1
>>>> DEBUG: compression = 1
>>>> DEBUG: Creating tile array (12x3)
>>>> DEBUG: Image size 8.006 x 1.811
>>>> DEBUG: Printable size 8.014 x 11.444
>>>> DEBUG: Scaled size 8.006 x 1.811
>>>> DEBUG: PageSize = [595 842] (8.26 11.69)
>>>> DEBUG: cupsWidth = 5770
>>>> DEBUG: cupsHeight = 8240
>>>> DEBUG: cupsBitsPerColor = 8
>>>> DEBUG: cupsBitsPerPixel = 8
>>>> DEBUG: cupsBytesPerLine = 5770
>>>> DEBUG: cupsColorOrder = 0
>>>> DEBUG: cupsColorSpace = 0
>>>> DEBUG: img->colorspace = 1
>>>> INFO: Formatting page 1...
>>>> x=(0,2881) y=(0,651), temp=(5763,1303)
>>>> top:  ht=8240, sz=1303, y=3596
>>>>
>>>> ***** QuadToPrinter Log *****
>>>>       Version 2.4.0.1
>>>>
>>>> PPDFILE = .\ppd\QuadR220.PPD
>>>> ERROR: Fatal error: Unable to find driver named "escp2-R220"!
>>>>
>> -
>> Roy Harrington
>> roy@...
>> Black & White Photo Gallery
>> http://www.harrington.com
>>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
-
Roy Harrington
roy@harrington.com
Black & White Photo Gallery
http://www.harrington.com