QTR-Quadtone RIP

Perfect. my question was about the functionality. I already tested 
this mod and it seems to work. Thank you!
Fabrizio

--- In QuadtoneRIP@yahoogroups.com, Roy Harrington <roy@...> wrote:
>
> I think you could change the Model from "escp2-R220"  to "escp2-
R200"
> in the QuadR220.ppd file and the code would find the R200 driver.
> 
> Roy
> 
> On Sunday, May 14, 2006, at 02:22  PM, itafaber wrote:
> 
> > Does it work anyway if I change the priner model line in the ppd
> > file?
> > thank you!
> > Fabrizio
> >
> > --- In QuadtoneRIP@yahoogroups.com, Roy Harrington <roy@> wrote:
> >>
> >> Hi Howard,
> >>
> >> There isn't an R220 driver but the R200 driver should work fine.
> >> Use the QuadR200 Printer Model and put your profiles under
> >> QuadR200-fsfsn.
> >>
> >> Roy
> >>
> >> On Saturday, April 22, 2006, at 06:45  AM, Howard Shaw wrote:
> >>
> >>> I should add printing in calibration mode _was_ working fine.
> > That
> >>> is now failing with the same error.
> >>>
> >>> --- In QuadtoneRIP@yahoogroups.com, "Howard Shaw" <glassman@>
> >>> wrote:
> >>>>
> >>>> I'm getting this error from QuadtoPrinter when trying to print
> >>> using
> >>>> a curve on my R220. Printing in Calibration mode works fine,
> > just
> >>>> not when using a curve.
> >>>>
> >>>> The log and the qidf file are below.
> >>>>
> >>>> Thanks for any assistance.
> >>>> Howard
> >>>>
> >>>> ***** QTRgui Log *****
> >>>>       Version 2.4.1.0
> >>>>       Print by Print
> >>>>       Execution Mode is Pipes
> >>>>
> >>>> ".\bin\ImageToRaster.exe" gui 0 0 1 "PPD=QuadR220.PPD
> >>>> PRINTER=QuadR220-fsfsn MediaType=Matte Pagesize=A4
> > topmargin=5.12
> >>>> leftmargin=0.13 scale-percent=100 portrait=yes Resolution=2880
> >>>> ColorModel=QTRIP" "C:\Program Files\QuadToneRIP\dinkla+Step-
21-
> >>>> gray.tif"
> >>>> ".\bin\QuadToPrinter.exe" gui 0 0 1 "PPD=QuadR220.PPD
> >>>> PRINTER=QuadR220-fsfsn MediaType=Matte Pagesize=A4
> > Resolution=2880
> >>>> RipSpeed=hispeed ColorModel=QTRIP ripCurve1=UT-
> > FS_IlfClPearl_2880
> >>>> ripCurve2=- ripBlend=100 stpDither=Ordered ripGamma=0
> > ripLimit=0"
> >>>> ".\bin\RawPrint.exe" "EPSON Stylus Photo R220 Series" -
> >>>  "dinkla+Step-
> >>>> 21-gray.tif"
> >>>>
> >>>> ***** ImageToRaster Log *****
> >>>>       Version 2.2.1.0
> >>>>
> >>>> INFO: .\bin\ImageToRaster.exe gui 0 0 1 PPD=QuadR220.PPD
> >>>> PRINTER=QuadR220-fsfsn MediaType=Matte Pagesize=A4
> > topmargin=5.12
> >>>> leftmargin=0.13 scale-percent=100 portrait=yes Resolution=2880
> >>>> ColorModel=QTRIP C:\Program Files\QuadToneRIP\dinkla+Step-21-
> >>> gray.tif
> >>>> PPDFILE = .\ppd\QuadR220.PPD
> >>>> DEBUG: Page = 595x842; 9,9 to 586,833
> >>>> DEBUG: Searching for profile "2880/Matte"...
> >>>> INFO: Loading image file...
> >>>> DEBUG: ImageOpen("C:\Program Files\QuadToneRIP\dinkla+Step-21-
> >>>> gray.tif", 1, 1, 100, 0, 0012F87C)
> >>>> calling ReadTIFF
> >>>> TIFFReadDirectory: Warning, C:\Program
> >>> Files\QuadToneRIP\dinkla+Step-
> >>>> 21-gray.tif: wrong data type 1 for "XMLPacket"; tag ignored.
> >>>> TIFFReadDirectory: Warning, C:\Program
> >>> Files\QuadToneRIP\dinkla+Step-
> >>>> 21-gray.tif: unknown field with tag 34665 (0x8769) 
encountered.
> >>>> DEBUG: TIFF resolution = 360.000000x360.000000, units=2
> >>>> DEBUG: Stored resolution = 360x360 PPI
> >>>> DEBUG: orientation = top-left
> >>>> DEBUG: photometric = 1
> >>>> DEBUG: compression = 1
> >>>> DEBUG: Creating tile array (12x3)
> >>>> DEBUG: Image size 8.006 x 1.811
> >>>> DEBUG: Printable size 8.014 x 11.444
> >>>> DEBUG: Scaled size 8.006 x 1.811
> >>>> DEBUG: PageSize = [595 842] (8.26 11.69)
> >>>> DEBUG: cupsWidth = 5770
> >>>> DEBUG: cupsHeight = 8240
> >>>> DEBUG: cupsBitsPerColor = 8
> >>>> DEBUG: cupsBitsPerPixel = 8
> >>>> DEBUG: cupsBytesPerLine = 5770
> >>>> DEBUG: cupsColorOrder = 0
> >>>> DEBUG: cupsColorSpace = 0
> >>>> DEBUG: img->colorspace = 1
> >>>> INFO: Formatting page 1...
> >>>> x=(0,2881) y=(0,651), temp=(5763,1303)
> >>>> top:  ht=8240, sz=1303, y=3596
> >>>>
> >>>> ***** QuadToPrinter Log *****
> >>>>       Version 2.4.0.1
> >>>>
> >>>> PPDFILE = .\ppd\QuadR220.PPD
> >>>> ERROR: Fatal error: Unable to find driver named "escp2-R220"!
> >>>>
> >> -
> >> Roy Harrington
> >> roy@
> >> Black & White Photo Gallery
> >> http://www.harrington.com
> >>
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> -
> Roy Harrington
> roy@...
> Black & White Photo Gallery
> http://www.harrington.com
>