QTR-Quadtone RIP

Thanks, John. I'll have a look at that tutorial and the UT7 curves 
posted on the files page. Hadn't thought to check there!

Mark 

--- In QuadtoneRIP@yahoogroups.com, "John Vitollo" <jvlist@...> wrote:
>
> --- In QuadtoneRIP@yahoogroups.com, "mccarvill" <espresso_forte@> 
wrote:
> >
> > Didn't get any replies to my previous post, so here's hoping the 
second 
> > time's the charm. Are any QTR users printing with UT7 inks and an 
Epson 
> > 7600, and which printing model are you using? 
> > 
> > I would have expected to see a "Quad7600-UT7" printing model 
listed in 
> > the software (e.g. Quad2200-UT7) but there isn't. I'd like to 
clarify 
> > this before I invest in a set of UT7 inks and carts for my 7600 
(and I 
> > can't get a straight answer from MIS).
> 
> Looks like there are no stock curves for the 7600/UT7 combo. What 
you could do, as a 
> starting point, is use the 2200-UT7 curves and work from there. 
It's all doable...just need 
> elbow grease.
> 
> Check the Files section for Carl's mini-tutorial...
>