QTR-Quadtone RIP

Didn't get any replies to my previous post, so here's hoping the second 
time's the charm. Are any QTR users printing with UT7 inks and an Epson 
7600, and which printing model are you using? 

I would have expected to see a "Quad7600-UT7" printing model listed in 
the software (e.g. Quad2200-UT7) but there isn't. I'd like to clarify 
this before I invest in a set of UT7 inks and carts for my 7600 (and I 
can't get a straight answer from MIS).

Many thanks

--- In QuadtoneRIP@yahoogroups.com, "mccarvill" <espresso_forte@...> wrote:
>
> Didn't get any replies to my previous post, so here's hoping the second 
> time's the charm. Are any QTR users printing with UT7 inks and an Epson 
> 7600, and which printing model are you using? 
> 
> I would have expected to see a "Quad7600-UT7" printing model listed in 
> the software (e.g. Quad2200-UT7) but there isn't. I'd like to clarify 
> this before I invest in a set of UT7 inks and carts for my 7600 (and I 
> can't get a straight answer from MIS).

Looks like there are no stock curves for the 7600/UT7 combo. What you could do, as a 
starting point, is use the 2200-UT7 curves and work from there. It's all doable...just need 
elbow grease.

Check the Files section for Carl's mini-tutorial...

Thanks, John. I'll have a look at that tutorial and the UT7 curves 
posted on the files page. Hadn't thought to check there!

Mark 

--- In QuadtoneRIP@yahoogroups.com, "John Vitollo" <jvlist@...> wrote:
>
> --- In QuadtoneRIP@yahoogroups.com, "mccarvill" <espresso_forte@> 
wrote:
> >
> > Didn't get any replies to my previous post, so here's hoping the 
second 
> > time's the charm. Are any QTR users printing with UT7 inks and an 
Epson 
> > 7600, and which printing model are you using? 
> > 
> > I would have expected to see a "Quad7600-UT7" printing model 
listed in 
> > the software (e.g. Quad2200-UT7) but there isn't. I'd like to 
clarify 
> > this before I invest in a set of UT7 inks and carts for my 7600 
(and I 
> > can't get a straight answer from MIS).
> 
> Looks like there are no stock curves for the 7600/UT7 combo. What 
you could do, as a 
> starting point, is use the 2200-UT7 curves and work from there. 
It's all doable...just need 

> elbow grease.
> 
> Check the Files section for Carl's mini-tutorial...
>