QTR-Quadtone RIP

You can try fixing this yourself. The paper sizes are in the PPD file. Look for
"ParamCustomPageSize". The units are in "points" or 1/72 inch. Change the first
number in the par for Width and Height.
 
 
-Stephen
 www.sbillard.org/Stephen

-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf
Of Andrew Unger
Sent: Saturday, May 14, 2005 12:20 PM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] Custom size Epson 4000


It was just reported in the 4000 Epson Group that if you switch off 
the Auto Paper Size check on the printer you can print with smaller 
than letter size.  I just attempted to print on a 5x7 inch cardstock.

Unfortunately, the QTR Custom Paper sizing wouldn't take anything 
smaller than 7x7 for the 4000.  The print went through the printer, 
but with 7x7 the positioning was all wrong and part of the image was 
omitted.  I hope that Roy or Steve will be able to permit selection
of 
sizes smaller than 7x7.  If this can get fixed, my 1160 will be 
history.

Andrew




  _____  

Yahoo! Groups Links


*	To visit your group on the web, go to:
http://groups.yahoo.com/group/QuadtoneRIP/
  

*	To unsubscribe from this group, send an email to:
QuadtoneRIP-unsubscribe@yahoogroups.com
<mailto:QuadtoneRIP-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
  

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .