QTR-Quadtone RIP

gefphoto wrote:
>  I took a photo file and edited it changing it to a
> B&W image and then saved it as a TIFF file so I could open it in
> QuadtoneRIP. I cannot get it to print at all. The printer goes through
> the motions moving the paper through the printer and the print heads
> move back and forth as if it were printing but I don't get an image.
> It has got to be some simple thing but I cannot figure it out. Any
> suggestions?
> 

Have you chosen a paper on the left hand slider side (Epson Enhanced 
Matte, for example) and made sure the "mixture" only uses it and not a 
blank one?

You could just set both sides to the same (Epson Enhanced Matte) and 
leave the mixture at 50%.

It sounds like your problem is somewhere in there about choosing the 
right paper.

You can also print b/w with the same inks you use for color. Just make 
sure you choose the right "printer" (R800 with the right inks, upperish 
right-hand-side)

Daniel