QTR-Quadtone RIP

If you have already used Enhanced Matte and Museo Max, it must mean 
you have matte black (MK) ink installed in your 7600. Silver Rag, on 
the other hand, requires you to use photo black (PK) ink installed.

I looked at the supplied curves for 7600 and 9600, and there is not 
one available for PK. So I am afraid you will have to start from 
scratch. Perhaps some other kind soul on this forum, who has already 
made one can send it to you.

Do you really want to switch from MK to PK? With Silver Rag you 
should know that you will get a lot of bronzing and gloss 
differential with the 9600 UC inks. You can always coat with Print 
Shield to reduce this effect.

Please also try to ask here:
http://tech.groups.yahoo.com/group/DigitalBlackandWhiteThePrint/
There may be someone who has generated 9600 PK curves for Silver Rag.

Good luck.

Shilesh

--- In QuadtoneRIP@yahoogroups.com, "gourdo420" <Mrcclancy@...> wrote:
>
> The problem is this-I don't know where to  begin with the settings 
for Silver Rag with the 
> 9600.  I am new to the QTR RIP-I just installed and loaded it 
yesterday.
> Can someone give me some advice on settings with this paper.
> 
> Enhanced Matte and Museo Max were easy enough to figure out.
> I am at a loss with Museo Silver Rag though, and I am hoping to get 
at least Neutral/cool 
> but hopefully Sepia as well.
> 
> 
> --- In QuadtoneRIP@yahoogroups.com, "Tom Moore" <r.t.moore@> wrote:
> >
> > --- In QuadtoneRIP@yahoogroups.com, "Jeff Randall" <jrandall@> 
wrote:
> > >
> > > --- In QuadtoneRIP@yahoogroups.com, "gourdo420" <Mrcclancy@> 
wrote:
> > > >
> > > > Does anyone know how to get a decent print using the QTR with 
Museo 
> > > Silver Rag?
> > > > I am hoping to achieve neutral b&w as well as sepia ideally.  
Please 
> > > help.
> > > >
> > > 
> > > Hi Mrcclancy:  You have to help us out a little here.  What 
printer and 
> > > inkset are you using?
> > >
> > That was in the subject. More to the point, what was the problem?
> > 
> > Tom Moore
> >
>